motors, esc's & hardware

[Alexgar]

Hah that box you have in the picture is the exact same one I have . Could you measure the water jackets for me please might take them if they aren't to long for castle 5700 motors

[kfxguy]

2 1/4" tall? Are you sure? That wouldn't fit in the sponsons of my boat lol? Maude your measuring with the cap bank on top? If so, I can move that. I need to know the height of just the esc. Width and length are fine.

[fla350tt]

2 1/4" tall? Are you sure? That wouldn't fit in the sponsons of my boat lol? Maude your measuring with the cap bank on top? If so, I can move that. I need to know the height of just the esc. Width and length are fine.

1 5/16 tall. The other measurement was with cap bank on top

[fla350tt]

Hah that box you have in the picture is the exact same one I have . Could you measure the water jackets for me please might take them if they aren't to long for castle 5700 motors

1 3/4" long

[lt130th]

I would like both the Swordfish 220 Pro+ ESC's please. I'm new to marine RC & I understand the electronics take quite a load. I'll use them for a twin build I'm doing. Are these ESC's up to the task of further punishment? You'll PM me paypal address & get my shipping info for total $ ?

Thanks,
Michael P.

[Alexgar]

1 3/4" long

Thanks to long can't be over 39mm

[fla350tt]

I would like both the Swordfish 220 Pro+ ESC's please. I'm new to marine RC & I understand the electronics take quite a load. I'll use them for a twin build I'm doing. Are these ESC's up to the task of further punishment? You'll PM me paypal address & get my shipping info for total $ ?

Thanks,
Michael P.

To be honest I had a problem running these together in a twin set up. One was always running harder than the other. I did post a question about it but did not get info on a fix.I have had 4 of these esc that do not calibrate easy to my spectrum radio, I just up the end points in my radio to get 100% full throttle. I saw a post one time saying there is a fix but it has to come from swordfish directly. The one with the sticker in the pic is the newest one and it does calibrate correctly, so maybe the newer ones have been fixed. Let me know if your still wanting them or one

[arnie84]

I would do $135 on hydra esc. Its just an offer if someone has dibs already or u dont take offer I understand but I can pay ASAP

[lt130th]

To be honest I had a problem running these together in a twin set up. One was always running harder than the other. I did post a question about it but did not get info on a fix.I have had 4 of these esc that do not calibrate easy to my spectrum radio, I just up the end points in my radio to get 100% full throttle. I saw a post one time saying there is a fix but it has to come from swordfish directly. The one with the sticker in the pic is the newest one and it does calibrate correctly, so maybe the newer ones have been fixed. Let me know if your still wanting them or one

Wow, I really appreciate the heads up. I already have one new Swordfish 220 Pro. I'll just pick up another new one as I planned & see how that works out. Thanks again for sharing all that info. Good seller!

[kfxguy]

Alright I'm going measure again to see if I have that much. Hang on

[kfxguy]

I'll take it. Make me a deal on a swordfish esc to while we are at it. Pm coming

[fla350tt]

I'll take it. Make me a deal on a swordfish esc to while we are at it. Pm coming

i will do the hydra and a swordfish for $225 shipped, let me know

[darryl whitman]

everything has to be in the thread, whats the question

I heard the same thing about the esc . u answered my question . thanks

[kfxguy]

Payment sent on the Hydra ice. Thanks man!

[trumph999]

Would you do 265 shipped to 92804 for the 1527 1.Y and a swordfish 220?