Tweet
I have some stuff that I will not ever get to that I've collected over a few years.
The sale is for the whole lot only. It's a hell of a deal if it's what you can use. You could turn around and sell some of it after and making money back it's up to you but, there is no junk here, everything is functional and either BNIB or never been used loaded and any running was just short blips to test function.
What I have for sale:
2 x T600 880Kv motors, properly shimmed, tested but, never used under load. They have missing black anodization spots but, it has no effect on performance. It is how I received them from Hobby King. Approx.New Value $60 each
2x Tacon 2860 5050Kv motor BNIB.... Would be a great pair of motors for a Mini Lynx on 2S each. Approx. New value $45 each.
2x Suppo/Fighter cat HV (6S-10S) 80-100 amp esc's. Both tested and running fine. Tested on 6S using a spark suppressor as I recommend you also add or use.
Both have extra DP270 epoxy on the boards, the blue shrinked one has the cooling plate glued on with Thermal Silicone electrical adhesive and the other I is not heat shrunk yet and has just Thermal paste on the FETS for the cooler. I will try to see if I still have some Silicone glue left and do the other one up but, I have no blue shrink wrap, just clear. Approx New value ?? $30 each??
2x 6mm to 3/16" REVERSE drive collets. You know how much these cost, look at HOR.
2x Water cooled motor mounts. Aprox. $10 New each.
Lastly a Hobby King 3665, 2100kv motor with cooler, NIB but, I took the heat shrink off the connectors waay back. Approx. $20.00 New Value.
All this for $120 Shipped USA or Canada.
Paypal only please.
More/ better pics tomorrow, good night....
The sale is for the whole lot only. It's a hell of a deal if it's what you can use. You could turn around and sell some of it after and making money back it's up to you but, there is no junk here, everything is functional and either BNIB or never been used loaded and any running was just short blips to test function.
What I have for sale:
2 x T600 880Kv motors, properly shimmed, tested but, never used under load. They have missing black anodization spots but, it has no effect on performance. It is how I received them from Hobby King. Approx.New Value $60 each
2x Tacon 2860 5050Kv motor BNIB.... Would be a great pair of motors for a Mini Lynx on 2S each. Approx. New value $45 each.
2x Suppo/Fighter cat HV (6S-10S) 80-100 amp esc's. Both tested and running fine. Tested on 6S using a spark suppressor as I recommend you also add or use.
Both have extra DP270 epoxy on the boards, the blue shrinked one has the cooling plate glued on with Thermal Silicone electrical adhesive and the other I is not heat shrunk yet and has just Thermal paste on the FETS for the cooler. I will try to see if I still have some Silicone glue left and do the other one up but, I have no blue shrink wrap, just clear. Approx New value ?? $30 each??
2x 6mm to 3/16" REVERSE drive collets. You know how much these cost, look at HOR.
2x Water cooled motor mounts. Aprox. $10 New each.
Lastly a Hobby King 3665, 2100kv motor with cooler, NIB but, I took the heat shrink off the connectors waay back. Approx. $20.00 New Value.
All this for $120 Shipped USA or Canada.
Paypal only please.
More/ better pics tomorrow, good night....
Nortavlag Bulc 
Comment