Hyperion and Neu lipo packs for sale!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • don ferrette
    Fast Electric Addict!
    • Aug 2010
    • 1093

    #1

    Hyperion and Neu lipo packs for sale!

    The following packs are up for sale at really good prices. The Hyperions are all the top of line EX series, the Neu is the only series they offer. All my packs are never charged over 1.5C and always properly storage charged on Hyperion DUO chargers. I will be venturing down a couple new avenues of builds this winter so I need to make room and thin things out a little-

    1- Hyperion EX 5S 5000mah - these four packs have been nothing short of stellar for me. I set numerous SAW and oval records and won I believe every heat I ran them in my 10S rigger. I ran these packs hard and they never missed a beat including last weekend at the practice pond and they charge up, balance, run and store charge great!!! One pair has green shrink wrap due to me overreacting after a hatch came loose when I first got them and they got wet. Cut off the wrap to dry them out and there wasn't squat under there for moisture. Needless to say they have had no problems since that day. On 2 of the packs there are bullet connectors to take the connection "hit" when I ran them as 10S, easily snipped off if you prefer. They were $156 each new, I'll sell them for $80 each, $150 for a pair or all 4 for $285. SOLD to Chris

    2- Neu 5S 6200mah - This was part of a 9S set up (the 4S pack is already spoken for) that I ran only a handful of times this year. Very low run time on it and ready to go. Was $116 new, $75 owns it.

    3- Hyperion EX 5S 4200mah - these two packs were used for record trials and set up testing and got pushed very hard. They still work just fine (ran them last weekend to check a hardware reconfig) and had planned to use them as 5S in parallel in my little Shocker cat but decided to go down to 4S so I can run it in the P classes. There is also a bullet connector on one to take the connection hit as 10S which can easily be snipped off. One pack for whatever reason "cops an attitude" every couple of charging cycles and is slow to balance out but always does so with that being said I'll let the pair go for $100, they were $133 each new. - SOLD to Jeff

    4- Hyperion EX 4S 3300 - these two packs are like new with very little use on them. They were supposed to be for the wife's new P sport hydro I just built but due to a slight miscalculation on my part of the battery tray height they push just a tad too much on the cowl causing the tape to keep working loose. $84 each new I'll let the pair go for $140 SOLD to Chili

    All packs have 6mm connectors already in place and will be included unless you want them removed. I have been straight up in all the descriptions about the packs and priced them accordingly so they are being sold as is. All prices are plus shipping and I can only ship in the continental US thanks to the new postal regulations.

    And while I feel the prices listed are very good I will entertain reasonable offers, with the key word being reasonable.
    Last edited by don ferrette; 12-14-2013, 05:54 PM. Reason: most items now sold
    - IMPBA Hall of Fame -
    - IMPBA Hydro Technical Director -
  • Jesse J
    scale FE racer
    • Aug 2008
    • 7116

    #2
    Need any more props? If ida known... I have a few more big props I could augment with some cash.
    I'm talking about the 4s pair.

    Sent from my Nexus 7 using Tapatalk
    "Look good doin' it"
    See the fleet

    Comment

    • don ferrette
      Fast Electric Addict!
      • Aug 2010
      • 1093

      #3
      Originally posted by Jesse J
      Need any more props? If ida known... I have a few more big props I could augment with some cash.
      I'm talking about the 4s pair.

      Sent from my Nexus 7 using Tapatalk
      Hi Jesse, To be honest about the only props I could use at the moment would be B&S Prather stainless 235 and maybe a 240. I'm actually going to be listing a batch of props for sale tomorrow.
      - IMPBA Hall of Fame -
      - IMPBA Hydro Technical Director -

      Comment

      • monojeff
        Moderator
        • Nov 2010
        • 2562

        #4
        Don I'd be interested in #3 if we can work out a future decal trade?
        Let me know if interested.
        Figured if throw it out there.
        Have a great holiday!
        OSE GIFTING ELF
        HAPPY HOLIDAYS!!

        Comment

        • don ferrette
          Fast Electric Addict!
          • Aug 2010
          • 1093

          #5
          Originally posted by monojeff
          Don I'd be interested in #3 if we can work out a future decal trade?
          Let me know if interested.
          Figured if throw it out there.
          Have a great holiday!
          Hey Jeff, Right now I have nothing "in the works" that will be needing any extensive graphics work (thanks for the killer wrap on the Shocker kitty though) but I will throw ya this bone - $90 shipped Priority for the pair.
          - IMPBA Hall of Fame -
          - IMPBA Hydro Technical Director -

          Comment

          • monojeff
            Moderator
            • Nov 2010
            • 2562

            #6
            Thanks Don but ill have to pass, great deal though!
            Cash is scares at moment due to holidays and expecting our first baby any day now.
            Happy holidays!
            OSE GIFTING ELF
            HAPPY HOLIDAYS!!

            Comment

            • don ferrette
              Fast Electric Addict!
              • Aug 2010
              • 1093

              #7
              Originally posted by monojeff
              Thanks Don but ill have to pass, great deal though!
              Cash is scares at moment due to holidays and expecting our first baby any day now.
              Happy holidays!
              Hey Jeff there might actually be something we can work out if you can do exterior grade stuff for my race trailer. If so I'll send you an image, I'm assuming you can you work with a .png file right?
              - IMPBA Hall of Fame -
              - IMPBA Hydro Technical Director -

              Comment

              • monojeff
                Moderator
                • Nov 2010
                • 2562

                #8
                Originally posted by don ferrette
                Hey Jeff there might actually be something we can work out if you can do exterior grade stuff for my race trailer. If so I'll send you an image, I'm assuming you can you work with a .png file right?
                Yes this is no problem.
                All the decals I make are exterior grade and fuel/oil proof.
                Same stuff used on full size vehicles gets used on our little boats.

                Send over what you need and we can discuss options.
                OSE GIFTING ELF
                HAPPY HOLIDAYS!!

                Comment

                • don ferrette
                  Fast Electric Addict!
                  • Aug 2010
                  • 1093

                  #9
                  Originally posted by monojeff
                  Yes this is no problem.
                  All the decals I make are exterior grade and fuel/oil proof.
                  Same stuff used on full size vehicles gets used on our little boats.

                  Send over what you need and we can discuss options.
                  You have the image file inbound to your e-mail.
                  - IMPBA Hall of Fame -
                  - IMPBA Hydro Technical Director -

                  Comment

                  • Chilli
                    Fast Electric Addict!
                    • Jan 2008
                    • 3070

                    #10
                    Don, Do you have a IMPBA Logo/District 12 file?? I might have Jeff do a few for my trailer.

                    I'm a little tight on cash until the holidays but am interested in the 4S 3300's for one of my planes. If no one picks them up before the end of the month, I'll probably take them.
                    Mike Chirillo
                    www.capitolrcmodelboats.com

                    Comment

                    • don ferrette
                      Fast Electric Addict!
                      • Aug 2010
                      • 1093

                      #11
                      Originally posted by Chilli
                      Don, Do you have a IMPBA Logo/District 12 file?? I might have Jeff do a few for my trailer.

                      I'm a little tight on cash until the holidays but am interested in the 4S 3300's for one of my planes. If no one picks them up before the end of the month, I'll probably take them.
                      Jeff and I worked out a deal on the 4200 packs he wants so I'll drop one of the smaller IMPBA D12 graphics I have in the box for him to copy.
                      - IMPBA Hall of Fame -
                      - IMPBA Hydro Technical Director -

                      Comment

                      • don ferrette
                        Fast Electric Addict!
                        • Aug 2010
                        • 1093

                        #12
                        The 4200mah 5S packs are sold to Jeff. The remaining have had a couple price adjustments. The Hyperion 5S 5000's are a super deal and have lots of life in them, they kicked butt the Sunday before last when I went testing props.
                        - IMPBA Hall of Fame -
                        - IMPBA Hydro Technical Director -

                        Comment

                        • Chilli
                          Fast Electric Addict!
                          • Jan 2008
                          • 3070

                          #13
                          Thanks!! I'll email Jim and see if he wants a few for his pretty new trailer.
                          Mike Chirillo
                          www.capitolrcmodelboats.com

                          Comment

                          • monojeff
                            Moderator
                            • Nov 2010
                            • 2562

                            #14
                            Originally posted by Chilli
                            Don, Do you have a IMPBA Logo/District 12 file?? I might have Jeff do a few for my trailer.

                            I'm a little tight on cash until the holidays but am interested in the 4S 3300's for one of my planes. If no one picks them up before the end of the month, I'll probably take them.
                            I will get you taken care of Mike.

                            Thanks Don! be in touch.
                            OSE GIFTING ELF
                            HAPPY HOLIDAYS!!

                            Comment

                            • flraptor07
                              Fast Electric Addict!
                              • Aug 2013
                              • 2451

                              #15
                              Don, the EX 5000mah 5s packs, how old are those and any idea of how many cycles on them? And would you take $250.00 shipped for all 4? BTW the 6s Hyperion packs I got from you are great!! used them this weekend in my new Q mono build maiden splash.

                              Comment

                              Working...