Tweet
SOLD
Selling my TLR 22 because the local indoor track closed down. I only run off-road in the winter, so this is a major disappointment. As you'll see but what included, my loss is your gain.
This buggy was built from a kit, but for a large part, the parts bear little resemblance to what was in the kit. I dare say most parts have been replaced with their equivalent TLR hop-up. This has never been run on dirt. The indoor track I raced at was carpet. It was raced from Novemeber 2012 to March 2013. It's been a shelf queen since and why it has to go.
Let me try to run down the details:
I just checked on A Main and the above would cost about $1100 new.
In terms of the hop-ups, I know I will miss many, but here goes:
On A Main, the above will cost about $620 new.
I'll let it go for much less than half price............$650. Buyer to pay shipping.
For $40 extra, I'll leave in the Spektrum SR3520 receiver.
DSC_0023.jpgDSC_0024.jpgDSC_0025.jpgDSC_0031.jpg
Selling my TLR 22 because the local indoor track closed down. I only run off-road in the winter, so this is a major disappointment. As you'll see but what included, my loss is your gain.
This buggy was built from a kit, but for a large part, the parts bear little resemblance to what was in the kit. I dare say most parts have been replaced with their equivalent TLR hop-up. This has never been run on dirt. The indoor track I raced at was carpet. It was raced from Novemeber 2012 to March 2013. It's been a shelf queen since and why it has to go.
Let me try to run down the details:
- TLR 22 built from roller kit - I built this as a mid-motor setup, but have all the parts to convert it to a rear motor setup
- Tekin RS Pro ESC
- Tekin REedline 8.5 motor
- Hitec HS-7940TH high voltage, ultra speed digital servo
- MyLaps RC4 transponder
- Losi Xcelorin 2S 3800mAh 60C battery packs - 2 packs
- Almost new set of Schmacher mini pins on back and Schmacher cut staggers on front
- Brand new set of the above mounted on a spare set of rims
- Brand new set of JConcepts offroad tires
- 4 extra rear rims and 2 extra front rims
- As seen in the pic, numerous spare front and rear a-arms and front bulkheads (including a new HR aluminium bulkhead)
- Extra springs for tuning the suspension (I have it set-up stiff front and back)
- TLR tools for shocks, slipper and turn-buckles
I just checked on A Main and the above would cost about $1100 new.
In terms of the hop-ups, I know I will miss many, but here goes:
- Ti-Nitride front and rear shock shafts
- Ti-Nitride front and rear king pins
- Ti-Nitride drive shafts
- Gear differencial
- JConcepts machines spur gear
- Titanium turnbuckles
- Titanium ball studs
- Titanium shock mounts
- Aluminum bleeder shock caps
- Aluminum steering rack
- Aluminum servo mount
- Aluminum front pivot and brace
- Brass kick angle shim
- Aluminum front hub carriers
- Aluminum front trailing spindles
- Aluminum rear toe plate
- Aluminum rear hexes
- Aluminum rear camber block
- Aluminum front camber block
- Aluminium rear hubs
- Aluminium rear hinge and brace
- Carbon fiber front shock tower
- Carbon fiber rear shock tower brace
- Carbon fiber battery hold down
- T-bone front and rear bumpers
On A Main, the above will cost about $620 new.
I'll let it go for much less than half price............$650. Buyer to pay shipping.
For $40 extra, I'll leave in the Spektrum SR3520 receiver.
DSC_0023.jpgDSC_0024.jpgDSC_0025.jpgDSC_0031.jpg
Comment