JetChopper30 - Current NAMBA P-Ltd Mono SAW Nat'l Record Holder

[properchopper]

(Car back in shop for second time in 2 weeks - this is getting old but boat must go)

SOLD

JetChopper 30 - 30" mono FG hull - basically a DF-like Cyberstorm bottom but with a DF 33-like ride pad
Fiberglass cloth laid in to reinforce bottom
birch ply transom doubler - all hardware aircraft nutted (no speed nuts to rotate)
Pure-Tech battery straps on birch ply battery platforms [can run 1P or 2P]
OSE servo mount (servo not included)
TFL watercooled motor mount (motor not included)
.150 cable with stainless drive dog
Speedmaster 3/16 stinger - shortened and lead-teflon bushings installed(very smooth)
Speedmaster .21 nitro rudder
split trim tabs w. inside edges tapered for better flow to prop
OSE turn fins.
hatch retention tabs

Boat is very capable P-Ltd Mono raceboat and eats Cyberstorms and Pursuits for breakfast
or
Drop in a 4074 - sized motor and Hold On !

In P-Ltd Mono Oval trim :

https://www.youtube.com/watch?v=Zx_WyN1yrBU

or with a 1800KV AQ spec motor out for a stroll in the rough :

https://www.youtube.com/watch?v=qkiTfVT1LaE

DSC05146.JPG DSC05149.JPG DSC05150.JPG

DSC05153.JPG DSC05151.JPG

Price : $175 (no electronics - ready for yours) PLUS shipping (I need to spend 4.50 for a box + $11 for 25 feet of bubble which I'll pay for out of the sale price) Shipping (depending on zip by USPS Parcel Post 5-7 days should be +/- $20)


First ILL TAKE IT gets it - no pm's please ; to make arrangements use [email protected] (by inbox floods daily)

Full disclosure : There is an almost invisible hairline crack up front - I'll post picture next post.

[liteumup69]

What are you asking for it?

[properchopper]

What are you asking for it?

Hang on, I'm still building the thread

[bracka69]

What would shipping be to 33178

[properchopper]

(Car back in shop for second time in 2 weeks - this is getting old but boat must go)

JetChopper 30 - 30" mono FG hull - basically a DF-like Cyberstorm bottom but with a DF 33-like ride pad
Fiberglass cloth laid in to reinforce bottom
birch ply transom doubler - all hardware aircraft nutted (no speed nuts to rotate)
Pure-Tech battery straps on birch ply battery platforms [can run 1P or 2P]
OSE servo mount (servo not included)
TFL watercooled motor mount (motor not included)
.150 cable with stainless drive dog
Speedmaster 3/16 stinger - shortened and lead-teflon bushings installed(very smooth)
Speedmaster .21 nitro rudder
split trim tabs w. inside edges tapered for better flow to prop
OSE turn fins.
hatch retention tabs

Boat is very capable P-Ltd Mono raceboat and eats Cyberstorms and Pursuits for breakfast
or
Drop in a 4074 - sized motor and Hold On !

In P-Ltd Mono Oval trim :

https://www.youtube.com/watch?v=Zx_WyN1yrBU

or with a 1800KV AQ spec motor out for a stroll in the rough :

https://www.youtube.com/watch?v=qkiTfVT1LaE

[ATTACH=CONFIG]108561[/ATTACH] [ATTACH=CONFIG]108562[/ATTACH] [ATTACH=CONFIG]108559[/ATTACH]

[ATTACH=CONFIG]108563[/ATTACH] [ATTACH=CONFIG]108560[/ATTACH]

Price : $175 (no electronics - ready for yours) PLUS shipping (I need to spend 4.50 for a box + $11 for 25 feet of bubble which I'll pay for out of the sale price) Shipping (depending on zip by USPS Parcel Post 5-7 days should be +/- $20)

Boy Scout Time : There is an almost invisible hairline crack up front -

DSC05155.JPG

[properchopper]

What would shipping be to 33178

I don't have any way of knowing the exact amount but last week I shipped a fully built JC30 (motor, esc, servo) which would be heavier to the east coast by USPS Parcel post and it was $18 5-7 day delivery

Please no PM's use [email protected] to discuss

[bracka69]

Thanks

[properchopper]

Still For Sale - Nicer Windshield

I'm surprised this hasn't been snapped up - must've been the weird windshield

Here's a proper(chopper) MonoJeff windshield to give it that mean/stealth look. Better ?

DSC05184.JPG DSC05186.JPG

(Car back in shop for second time in 2 weeks - this is getting old but boat must go)

JetChopper 30 - 30" mono FG hull - basically a DF-like Cyberstorm bottom but with a DF 33-like ride pad
Fiberglass cloth laid in to reinforce bottom
birch ply transom doubler - all hardware aircraft nutted (no speed nuts to rotate)
Pure-Tech battery straps on birch ply battery platforms [can run 1P or 2P]
OSE servo mount (servo not included)
TFL watercooled motor mount (motor not included)
.150 cable with stainless drive dog
Speedmaster 3/16 stinger - shortened and lead-teflon bushings installed(very smooth)
Speedmaster .21 nitro rudder
split trim tabs w. inside edges tapered for better flow to prop
OSE turn fins.
hatch retention tabs

Boat is very capable P-Ltd Mono raceboat and eats Cyberstorms and Pursuits for breakfast
or
Drop in a 4074 - sized motor and Hold On !

In P-Ltd Mono Oval trim :

https://www.youtube.com/watch?v=Zx_WyN1yrBU

or with a 1800KV AQ spec motor out for a stroll in the rough :

https://www.youtube.com/watch?v=qkiTfVT1LaE

[ATTACH=CONFIG]108561[/ATTACH] [ATTACH=CONFIG]108562[/ATTACH] [ATTACH=CONFIG]108559[/ATTACH]

[ATTACH=CONFIG]108563[/ATTACH] [ATTACH=CONFIG]108560[/ATTACH]

Price : $175 (no electronics - ready for yours) PLUS shipping (I need to spend 4.50 for a box + $11 for 25 feet of bubble which I'll pay for out of the sale price) Shipping (depending on zip by USPS Parcel Post 5-7 days should be +/- $20)


First ILL TAKE IT gets it - no pm's please ; to make arrangements use [email protected] (by inbox floods daily)

Full disclosure : There is an almost invisible hairline crack up front - I'll post picture next post.

[4sdash]

Sorry I read the ad wrong

[teddyboy]

The last boat I bought from you was shipped perfectly and the boat was also a work of art. It also was a jet chopper 30. Thanks to Tony

[Neubs]

Hi Tony, I will take it.

[properchopper]

Hi Tony, I will take it.

Great !

I'll e-mail you tomorrow to do the details