blizzard outrigger

[flip3d]

I HAVE A NICE BUT USED OUTRIGGER.brushless motor and esc pulled for project boat.
now comes with brushed motor and proboat water proof esc.
i got in trade
Fuller Next generation hardware
hs81 mg servo/rudder
the boat is fast. on 7 cells.
will pull motor and esc for 125$
with motor esc 175

those both include a traxxas tq3 radio system.

boat is gray primer wating for you to paint the way you want it.

those prices are + shipping
want a fe mono.

[Diegoboy]

I HAVE A NICE BUT USED OUTRIGGER.
i got it in a trade.
it has a feigao bl motor
cc baracuda 80 esc.
unknown hw but is all metal
hs81 mg servo/rudder
the boat is fast. on 7 cells.
will pull motor and esc for 150$
with motor esc 225$

those both include a traxxas tq3 radio system.

boat is gray primer wating for you to paint the way you want it.

those prices are + shipping
want a fe mono.

If my math is correct, then you'll sell the Motor & ESC fot $75 shipped?

[flip3d]

no i will sale the hull hw for 150. if you have your own power supply.
i will not pull the motor and esc out to sale.
its with it or with out it.
and it says those prices anr + shipping
i ment 325$
sorry

[Ub Hauled]

Fuller Next generation hardware... that is the unknown HW

[ace028]

The strut is backwards just to let you know.

[flip3d]

thankyou.
i did not build it.
ok reduced full boat rtr for 280.
i am not into the riggers.
i would rather have a mono

[stvkid]

is this item still avaible
how did it handle when you ran it

[Ub Hauled]

stv kid,
this is a great hull... handles great, I own one.

[stvkid]

it seems its a NICE HULL
HOW MUCH CHOP CAN IT HANDLE I HAVE A FRIEND TOLD ME UNLESS ITS GLASS SMOOTH SHELL FLIP
I WILL BE RUNNING IT IN A LAKE WITH NOTHING MORE THEN A LITTLE 1MM RIPPLE

[Ub Hauled]

you'll be fine in the lake... depending on the motor a 632 prop is great, plenty fast, watch the heat.
I ran mine at 71mph over bigger chop then 1mm... granted I flipped but I was able to go at least 330 feet (speed traps)

[stvkid]

Ohh Very Nice What Do You Think I Could See Out Of This Boat With This Setup?
I Love The Look Of The Riggers
I Plan On Putting A Custom Paintjob With Some Airbrush Graphics Juts Waiting For A Reply

[Ub Hauled]

the speeds I mentioned above were in a SAW setup... no more then 2 passes.
you should find a setup that works for you (driving skills and location).
I have used an 8L with that 632 and it was nice... it had a little heat, specially
since the motor was not cooled, the L can is the largest you can fit in there w/o modifications. The S can is what it was made for.

[stvkid]

I Plan On Throughing In Water Colling Once I Have It I Realy Liek This Boat But Im Still Waiting For A Response It Seams Nice And The Lake I Plan On Running In With My Buddy Is Large He Runs A Bj

[Dr. Jet]

I Plan On Throughing In Water Colling Once I Have It I Realy Liek This Boat But Im Still Waiting For A Response It Seams Nice And The Lake I Plan On Running In With My Buddy Is Large He Runs A Bj

I'm not entirely certain I understand that.

[Ub Hauled]

LoL.....