leo 4082 motor and hrc 5692 polished jackets

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • iridebikes247
    Fast Electric Addict!
    • Dec 2011
    • 1449

    #1

    leo 4082 motor and hrc 5692 polished jackets

    Here is a leopard 4082 1600kv that was in good shape until the motor shaft bent. how did it happen? Motor was revved when the collet was loose, it flew off and caught the bottom of the hull bending the shaft. user error. $45 shipped OBO, maybe you have a rotor and shaft from one and can build one good motor. Bearings are in good shape, comes with 6mm bullet connectors, cooling jacket and motor exterior are in great shape. I pulled it apart magnets and everything is fine just needs a new shaft/rotor.

    Also HRC 5692 jackets, polished to a mirror shine. No cooling nipples, I removed them for polishing awhile back and can't find them. Seals are in good condition no leaking will occur. I would like $45 shipped for the two of them, I think thats fair. thanks for looking

    20131017_194646.jpg20131017_194658.jpg20131017_194723.jpg20131017_194646.jpg
    Youtube: https://www.youtube.com/channel/UCSr...6EH3l3zT6mWHsw
  • steveo
    Fast Electric Addict!
    • Apr 2007
    • 1454

    #2
    I am very interested in your 4082 could u measure the length of the magnet and width. Thanks

    Comment

    • iridebikes247
      Fast Electric Addict!
      • Dec 2011
      • 1449

      #3
      hm what do you mean? I have these numbers



      When you say length of magnet and width, with rotor removed I could use my digital caliper and measure the diameter of the inner circle of magnets, and stick a ruler in and measure the length of magnet not sure if this is what you want so let me know.
      Youtube: https://www.youtube.com/channel/UCSr...6EH3l3zT6mWHsw

      Comment

      • steveo
        Fast Electric Addict!
        • Apr 2007
        • 1454

        #4
        Sorry just the rotor

        Comment

        • iridebikes247
          Fast Electric Addict!
          • Dec 2011
          • 1449

          #5
          20131017_220918.jpg

          so its 58mm for the rotor i think the picture shows it pretty accurately too. nice motor i think anyone would be happy with it if they had a rotor laying around. i know i would be lol but couldn't find the parts I needed so here it is for sale.
          Youtube: https://www.youtube.com/channel/UCSr...6EH3l3zT6mWHsw

          Comment

          • steveo
            Fast Electric Addict!
            • Apr 2007
            • 1454

            #6
            How about the diameter

            Comment

            • iridebikes247
              Fast Electric Addict!
              • Dec 2011
              • 1449

              #7
              18mm at the aluminum looking part and 18.4mm at the fattest point of the wrapped rotor.
              Youtube: https://www.youtube.com/channel/UCSr...6EH3l3zT6mWHsw

              Comment

              • steveo
                Fast Electric Addict!
                • Apr 2007
                • 1454

                #8
                Well have a rotor from a castle 1520 that matches damn near identical, I can't think of a reason I need another motor if u want to try see if this rotor works I will ship it to u. My motor is toast rotor in good shape

                Comment

                Working...