Tweet
Up for sale is my favorite little race boat ( 53 mph on 4s) aeromarine mean machine hull and hardware only. Its got a speedmaster strut and a speedmaster 21 dual water pickup rudder. The motor mount is set up for a 40 mm can ( had a fine design nemesis gold 1500 kv with a seaking 180 did 68 mph on 6 s )and a 3/16 shaft. the hull has a carbon fiber inlay and the hatch is from Fast n furious racing which is also all carbon fiber. The hull was yellow but I painted it white and put airplane trim strips for the graphics. As you can see in the pics the graphics and white trim strips are peeling up ( the hatch and most of the deck is all trim strips after a while the tape started to peel the paint up !). The canopy on the hatch is painted blue with a silver wind screen. A while back the front of the deck started to get black line where the two hulls came together so I put some clothe up there and put in the two part epoxy foam from Kintec racing ( the foam made a nice difference in stiffing up the front of the boat and I use that stuff in all my boats now) and its been good ever since,I just never got around to fixing it the outside. Basically to make the hull mint it needs to be stripped down and repainted with some minor stress crack repair other than that the hull is in good shape! or just put your electronics in it and run it!. 75 $ or BO plus shipping ( should be more that twenty bucks to continental us)
Comment