Tweet
Carbon Fiber Fightercat Daytona WITH EVERYTHING NEEDE TO BUILD ALL BRAND NEW
Hey, guys unfortunately I was hit by a drunk driver on my motorcycle a few months back and have just got to the point of doing things on my own again. I wont be able to build this anytime in the near future so everything may as well go to someone that will. If your on this forum than you know what what everything pictured here is worth.
The price for everything will be $650.00 OBO but please dont lowball an offer, Make a reasonable offer and its yours. my email address is [email protected] , in case I cant get back around to checking here as often as I would like. EVERY THING IS BRAND NEW AND STILL IN ORIGINAL PACKAGING. The Hull has been cut for stuffing tube and prepped for Carbon fabric , but that is as far as I Got.
Now on to what is included. I may miss a few things here but check the pics to see it all. thanks guys.
At this point email is the best way to reach me , my email address is above, just drop a line and I will check back here for offers. price is negotiable.
Fighter Cat Daytona Hull (Carbon Fiber 37")
custom Sea King T180 esc & and extra cap bank with fighter cat cooling Block
fightercat 3037 Motor
Fightercat motor mount
Kintec Racing - 3 5/8" Cat Rudder and 3/16 strut W/off-set Bracket
Leopard 4082 1800Kv Motor & Water Jacket (still debating on going with a fighter cat 3730/1600kv Out runner)
motor mount for the Leo (if you go that route)
Fighter cat 4 bolt profile series motor mount (universal mount)
Servo
billet alum. fake exhaust ports (to use as water outlets in the rear of boat)
Castle Creations connectors (8 or 10 dont remember exact size but big!!)
Carbon fiber servo mount
carbon fiber ESC mount
carbon fiber battery blocks
Carbon fiber plate for use as cover over electronics or whatever , 10"x10"
Two Props , one brass , one billet alum.
carbon fiber servo arm
1/4" brass stuffing tube (to be used with .187 flex without Teflon)
1 standard size transom water inlet
2 standard size water outlets
antenna mount (redundant but needed with carbon fiber I've read)
2'X2' Blue/Black carbon fiber fabric
10" X 24" Blue /Black carbon fiber fabric
2" carbon fiber fabric tape
Epoxy (unopened)
2 medium size linkage rod boots
misc. sized linkage rods, and rod ends
Sky RC BEC
Low Profile Servo Mount
hatch bolt kit & hatch Seal
extreme duty heat shrink tubing
High Pressure Braided water hose
Multiple fightercat decals in white and chrome to include windshields, and all the hatch covers etc...
Check the pics for more items forgotten
The price for everything will be $650.00 OBO but please dont lowball an offer, Make a reasonable offer and its yours. my email address is [email protected] , in case I cant get back around to checking here as often as I would like. EVERY THING IS BRAND NEW AND STILL IN ORIGINAL PACKAGING. The Hull has been cut for stuffing tube and prepped for Carbon fabric , but that is as far as I Got.
Now on to what is included. I may miss a few things here but check the pics to see it all. thanks guys.
At this point email is the best way to reach me , my email address is above, just drop a line and I will check back here for offers. price is negotiable.
Fighter Cat Daytona Hull (Carbon Fiber 37")
custom Sea King T180 esc & and extra cap bank with fighter cat cooling Block
fightercat 3037 Motor
Fightercat motor mount
Kintec Racing - 3 5/8" Cat Rudder and 3/16 strut W/off-set Bracket
Leopard 4082 1800Kv Motor & Water Jacket (still debating on going with a fighter cat 3730/1600kv Out runner)
motor mount for the Leo (if you go that route)
Fighter cat 4 bolt profile series motor mount (universal mount)
Servo
billet alum. fake exhaust ports (to use as water outlets in the rear of boat)
Castle Creations connectors (8 or 10 dont remember exact size but big!!)
Carbon fiber servo mount
carbon fiber ESC mount
carbon fiber battery blocks
Carbon fiber plate for use as cover over electronics or whatever , 10"x10"
Two Props , one brass , one billet alum.
carbon fiber servo arm
1/4" brass stuffing tube (to be used with .187 flex without Teflon)
1 standard size transom water inlet
2 standard size water outlets
antenna mount (redundant but needed with carbon fiber I've read)
2'X2' Blue/Black carbon fiber fabric
10" X 24" Blue /Black carbon fiber fabric
2" carbon fiber fabric tape
Epoxy (unopened)
2 medium size linkage rod boots
misc. sized linkage rods, and rod ends
Sky RC BEC
Low Profile Servo Mount
hatch bolt kit & hatch Seal
extreme duty heat shrink tubing
High Pressure Braided water hose
Multiple fightercat decals in white and chrome to include windshields, and all the hatch covers etc...
Check the pics for more items forgotten
Comment