Park strafing mustang micro war bird

[ace028]

Here is a park strafing mustang from the finish crew. I have mostly put it together, started to cover it, and got frustrated because I don't know to cover it. You might want to take the covering off and recover it. I just don't have the patience, and have too many other unfinished projects, plus I don't know anything about planes. Here is what you get

Park strafing mustang
- 18 inch wingspan
- length 14 1/4 inches
- capable of 60mph if correctly set up

Eflite 180 outrunner (recomended motor)

2 gws 4040 props

1 roll of yellow micro covering
1 roll of black micro covering
I have only used a small amount of the coverings, you probably can cover several more.


note the wing is not broken, it needs a hinge, the other one is taped in place to hold it.
I am looking to get $65 shipped. Please ask any questions thanks

[nothingbutwake]

covering for mustang

Your best bet is to pick up some Monokote in the colors you want. As for applying it is very easy actually you peel off the plastic backing and use an iron with a low to medium setting. On the iron you tie on a thin wash cloth so the iron's exposed metal will not melt the monokote. If you have everything there for the kit and the plane is 90 % finished why not cover it and dump it on RC Universe you'd get atleast $90 - $110 + shipping for it, if it has been covered and the decals placed on it. Give it a shot mono runs fairly cheap. It's worth the investment it will also make the plane easier to sell if everything is done.

Cheers
Nothingbutwake

[ace028]

The monokote is a super thin kind, I want to concentrate on boats for now. thanks for the advise.