MHZ 138 Carbon Kevlar - RedBull SILVER EDITION

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nata2run
    customcfparts.com
    • Nov 2011
    • 1837

    #1

    MHZ 138 Carbon Kevlar - RedBull SILVER EDITION

    Hello All,
    Good things come to those who wait. I have decided to build another 50"+ boat, and for that reason I'm letting go of my MHZ 138 54" Red Bull inspired "silver Edition". This is a truly amazing and fun boat with plenty of guts. (a whole build thread exists on OSE)

    It can be run very casual on 6s per side at around 80mph, or for more serious speeds on 8s at so far 92mph with 52mm props. It can also run in WYE mode on 12s for speeds up around 90-

    100+ depending on prop choice. This is not tested, but quite possible to achieve. (He who want to run a 100mph should know how) To me it has never been an issue as I enjoy the look of the boat rather than the speed.

    Back.jpgClose up inside.jpgDSC03636.jpgFront side.jpgIMG_3564.jpg


    Some of the highlights include:
    - MHZ 138 54" Carbon Kevlar
    - MHZ Hardware rudder/drives
    - x2 2280/5 Lehner Motors with full size cooling jacket (no more than 5 runs never hot, no water)
    - x2 160HV YGE Speed Controller (Brand New newer run) +program card
    - Complete custom carbon fiber interior with foil inlay and anodized washers.
    - Double Layer 6mm motor mounts, 12s capable Lipo Slide System
    - x2 MBP collets
    - Savox 1256tg servo
    - 5mm Gundart Drive cable/system ( will easy spin a 57mm prop)
    - MR3000 reciever

    Not included:
    Radio, RX battery, Lipo's or props


    All electric cables and hoses have nylon mesh wire applied for protection.

    ESC's are fitted with male/female 5.5mm bullet connectors.


    This boat is painted in 2pack Metallic POLAR Silver paint with clear coat, and metallic decals.(non permanent)
    She’s a real stunner!! NO CHIPS OR DINGS! 100% OK


    I am willing to ship worldwide. (Economy Class and no insurance) Buyer pays difference for EMS with or without insurance.

    Price: $5,995.00
    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
    "Follow someone's footsteps and you will always be a step behind"
  • nata2run
    customcfparts.com
    • Nov 2011
    • 1837

    #2
    Yes Chris but have to move on to something else. You know we get bored LOL
    @ blowNover, thank you!

    Also thought I would ad some more pictures of the hardware
    Lipo system.jpgPaint.jpgTube-carbon rod.jpgUnder hood1.jpg
    Last edited by nata2run; 07-23-2013, 03:16 AM.
    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
    "Follow someone's footsteps and you will always be a step behind"

    Comment

    • asars85
      Member
      • May 2013
      • 93

      #3
      ...
      Last edited by asars85; 07-23-2013, 06:41 AM.

      Comment

      • Mel279
        Senior Member
        • Dec 2008
        • 857

        #4
        looks tempting...what a beauty!!!
        Stiletto tunnel,EPV135 (53") twin cat, CT06"Spirit of Qatar", FD 47" mono, Twin Mini Cat 23.5"

        Comment

        • iridebikes247
          Fast Electric Addict!
          • Dec 2011
          • 1499

          #5
          Kents carbon work is in a league of its own. Anyone buying this is buying one of the most artistic boats out there.
          Youtube: https://www.youtube.com/channel/UCSr...6EH3l3zT6mWHsw

          Comment

          • nata2run
            customcfparts.com
            • Nov 2011
            • 1837

            #6
            Originally posted by iridebikes247
            Kents carbon work is in a league of its own. Anyone buying this is buying one of the most artistic boats out there.
            WOW, Thanks! very kindly said Mike. I'm purely selling to make room for something new. I wish I could keep all the boats, but the budget simply won't allow that.
            Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
            "Follow someone's footsteps and you will always be a step behind"

            Comment

            • nata2run
              customcfparts.com
              • Nov 2011
              • 1837

              #7
              Rough Estimate of investment:
              Hull and Hardware $1650
              Lehner Motors 2280/5 $1200
              YGE 160HV ESC's +card $900
              Servo $90
              RX $85
              Carbon Interior $700
              2Pack Paint Job $1100
              Vinyl decals $200
              Screws, clamps, washers, hoses, resin, trims etc. $220

              Total cost in hardware $6145 "Minimum"
              In this case, the build is FREE
              Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
              "Follow someone's footsteps and you will always be a step behind"

              Comment

              • worriedsick4u
                Senior Member
                • Dec 2011
                • 693

                #8
                Will you do 5k?

                Comment

                • nata2run
                  customcfparts.com
                  • Nov 2011
                  • 1837

                  #9
                  Hmm, the price asked s a "no more to pay" as per forum rules. But out of the sale I pay the paypal fees "$250" and also post to your destination. That could be expensive. Will you meet me half way? $5500? I also have to ship in a crate, all those things need to be considered, and will most definetely cost me. I will also include all the spare parts.

                  5k if you pickup only.
                  Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                  "Follow someone's footsteps and you will always be a step behind"

                  Comment

                  • worriedsick4u
                    Senior Member
                    • Dec 2011
                    • 693

                    #10
                    Do you have props?

                    Comment

                    • nata2run
                      customcfparts.com
                      • Nov 2011
                      • 1837

                      #11
                      The boat is now SOLD! Congratulations to the new owner, and thank you.
                      Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                      "Follow someone's footsteps and you will always be a step behind"

                      Comment

                      Working...