Tweet
Could trade for a V-Hull boat of comparable value
$515 Shipped, USPS Shipping, Paypal Only
Roller as pictured. THIS IS NOT RTR.
This a delrin "Z-Maxx" chassis I had CNC cut. I took a Snoopmax MT chassis and tweaked the design a little bit to come up with what you see below.
Had friend make the CAD modifications and cut it out in 1/8" delrin too. Only three were made.
Lightweight at only 6.5lbs RTR with a 2200 3s lipo. THIS IS NOT RTR.
Busted the upper cab because I left one cross brace off by accident. No fault in the chassis geometry, just me failing to see the brace holes cause the CNC didn't cut all the way through. Not a big issue for chassis strength. The screws hold it in place or some epoxy could be used. CAB IS REMOVABLE TOO.
Video,
Body is not mounted, just sitting on chassis
Big Bore 100mm shocks.
MIP Driveshafts
Axial trans upgraded with BWD motor mount, Robinson Racing One Piece Gear, All metal small gears, Vanquish Transmission Case.
Axial AL skid with handmade double shear mounts
Lunsford Ti links setup for the body pictured, 40/60 setup. I have the other links to shorten the rear back up.
Clod wheels modded for SLW hubs and reinforced delrin Dlux wheelfaces. 450 SLW hubs
Rumbles shaved down, they are new.
Coat hanger sway bars
Wraith Kit axles ran 4-5 battery packs.
Thin metal electronics plate
$515 Shipped, USPS Shipping, Paypal Only
Roller as pictured. THIS IS NOT RTR.
This a delrin "Z-Maxx" chassis I had CNC cut. I took a Snoopmax MT chassis and tweaked the design a little bit to come up with what you see below.
Had friend make the CAD modifications and cut it out in 1/8" delrin too. Only three were made.
Lightweight at only 6.5lbs RTR with a 2200 3s lipo. THIS IS NOT RTR.
Busted the upper cab because I left one cross brace off by accident. No fault in the chassis geometry, just me failing to see the brace holes cause the CNC didn't cut all the way through. Not a big issue for chassis strength. The screws hold it in place or some epoxy could be used. CAB IS REMOVABLE TOO.
Video,
Body is not mounted, just sitting on chassis
Big Bore 100mm shocks.
MIP Driveshafts
Axial trans upgraded with BWD motor mount, Robinson Racing One Piece Gear, All metal small gears, Vanquish Transmission Case.
Axial AL skid with handmade double shear mounts
Lunsford Ti links setup for the body pictured, 40/60 setup. I have the other links to shorten the rear back up.
Clod wheels modded for SLW hubs and reinforced delrin Dlux wheelfaces. 450 SLW hubs
Rumbles shaved down, they are new.
Coat hanger sway bars
Wraith Kit axles ran 4-5 battery packs.
Thin metal electronics plate
Comment