House Cleaning Sale

[bill34207]

I had a moment of weakness and bought a large ESM P-39 Warbird and I need to clear out some space for it. So, I'll start with this one.
AQ VS1 tunnel. Very good condition. UL-1 motor & ESC. HRC jacket. REK leg Grimm 40/52 (I think) prop. Hitec 645 MG servo. Add your radio and 5000 ma 4s battery for a spec class legal tunnel. $275.00 shipped in the lower 48 with paypal payment. SOLD

[bill34207]

Phil Thomas Stealth for LSH

Phil Thomas Stealth. UL-1 motor with HRC jacket, UL-1 ESC. Virginia Craftsman turn fin, butch lock, Speedmaster rudder & strut. Octura M445 prop. Runs very well but the sponson bottoms could use a sand & repaint. Add your radio and battery and go racing. $300.00 shipped in the lower 48 with paypal payment. SOLD

[longballlumber]

I want to be first in line for LSH... Is that pour in foam in the hull interior? Is there any added weight in the hull (CG ballast)

Thanks
Mike

[bill34207]

It's actually closed cell foam in it. I'm not really sure if there's any ballast lead in there or not (I got the boat from Chris) but think it could use about an oz. up close to the tip of the left sponson. I've just been too lazy to do it and finish tuning it. Ackerman doesn't really work well for small hydro's since it's almost always choppy there.

[longballlumber]

It's actually closed cell foam in it. I'm not really sure if there's any ballast lead in there or not (I got the boat from Chris) but think it could use about an oz. up close to the tip of the left sponson. I've just been too lazy to do it and finish tuning it. Ackerman doesn't really work well for small hydro's since it's almost always choppy there.

So is the foam removable? It's difficult to tell from the pictures, but it looks like something that was "formed" to the inside of the boat and would be difficult to remove if necessary. I don't mind doing a little work on the hull, but I am not interested in getting a complete project. Just trying to understand what I am getting myself into...

Thanks
Mike

[JMSCARD]

If longball doesn't take the stealth I will.... no worries here, paypal waiting.

[bill34207]

So is the foam removable? It's difficult to tell from the pictures, but it looks like something that was "formed" to the inside of the boat and would be difficult to remove if necessary. I don't mind doing a little work on the hull, but I am not interested in getting a complete project. Just trying to understand what I am getting myself into...

Thanks
Mike

The foam can be removed. It might take a bit of effort since it was compressed and forced into the opening but it's not glued in.
As always, the 1st "I'll take it" gets it.

[macace123]

Is the tunnel still for sale

[bill34207]

Is the tunnel still for sale

Looks like you are 1st in line for the tunnel if interested.

[macace123]

PP Email Please

[longballlumber]

The foam can be removed. It might take a bit of effort since it was compressed and forced into the opening but it's not glued in.
As always, the 1st "I'll take it" gets it.

Hi Bill,

I am not sure if you've sold it to someone else or not. If not, I will take it. Send me your PayPal and I pay asap.

Thanks
Mike

[bill34207]

PP Email Please

Sorry, at work right now so just spotted this. Paypal is [email protected]
I'll go to work on getting it boxed up tonight as soon as I get home.

Same on the Phil Thomas, Mike

[longballlumber]

Same on the Phil Thomas, Mike

Done, you have money!

[T.S.Davis]

Done, you have money!

tool

[bill34207]

Done, you have money!

Got it