Tweet
F/S: Brand New Swordfish 200 ESC (older version - No data loging)20130606_131805.jpg.....comes with program disk and program card...never plugged in...
Hifei Swordfish 200 amp water cooled esc. This is a high quality ESC designed specifically for racing boat. Unique PCB layout allows the water cooling plate to cool both fet boards evenly. Programing can be done with your transmitter or optional program card, optional USB adapter or optional LCD Program Box/Handheld Unit.
6-20 NiCad/NiMh cells or 2s to 6s LiPo. This unit is water resistant.
As of 8/16/2011 these come with a second cooling plate.
Specs:
Microprocessor controlled
Extremely low resistance .00066 ohm
200A continuous
Up to 20cells NiMH/NiCad or 2 to 6cell Lithium-polymer
High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
Built in Battery Eliminator Circuit(BEC) 3.5A
Programmable low voltage cutoff
Programmable cutoff types(soft cutoff/hard cutoff)
Programmable brake type(disable/soft brake/hard brake)
Time advance programmable (low/standard/high)
Supports Hifei Program Card and/or USB Link
Programmable start up type(very soft start/soft start/fast start)
Thermal Protection(100 centigrade)
Safe “power on” arming program ensures motor will not accidentally turn on.
The ESC is disabled when the voltage is over 26v at power-on
10 Gauge Wire Battery end.
10 Gauge Wire on the motor end.
Measures: 110mm X 44mm X 24mm
Weights: 155gr
Requires:
8mm connectors on battery end.
5.5mm Bullet connectors on the motor end.
$85.00 Shipped to the lower 48's...
First to say I will take it gets it...
Please post interests here...No pm's please...
Paypal preferred......
Will also post this on International Waters site...
Thanks,
Kent
Hifei Swordfish 200 amp water cooled esc. This is a high quality ESC designed specifically for racing boat. Unique PCB layout allows the water cooling plate to cool both fet boards evenly. Programing can be done with your transmitter or optional program card, optional USB adapter or optional LCD Program Box/Handheld Unit.
6-20 NiCad/NiMh cells or 2s to 6s LiPo. This unit is water resistant.
As of 8/16/2011 these come with a second cooling plate.
Specs:
Microprocessor controlled
Extremely low resistance .00066 ohm
200A continuous
Up to 20cells NiMH/NiCad or 2 to 6cell Lithium-polymer
High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
Built in Battery Eliminator Circuit(BEC) 3.5A
Programmable low voltage cutoff
Programmable cutoff types(soft cutoff/hard cutoff)
Programmable brake type(disable/soft brake/hard brake)
Time advance programmable (low/standard/high)
Supports Hifei Program Card and/or USB Link
Programmable start up type(very soft start/soft start/fast start)
Thermal Protection(100 centigrade)
Safe “power on” arming program ensures motor will not accidentally turn on.
The ESC is disabled when the voltage is over 26v at power-on
10 Gauge Wire Battery end.
10 Gauge Wire on the motor end.
Measures: 110mm X 44mm X 24mm
Weights: 155gr
Requires:
8mm connectors on battery end.
5.5mm Bullet connectors on the motor end.
$85.00 Shipped to the lower 48's...
First to say I will take it gets it...
Please post interests here...No pm's please...
Paypal preferred......
Will also post this on International Waters site...
Thanks,
Kent
From Down Under - Australia
Comment