(14) 4s 3300 mah ENERLAND lipos

[JMSCARD]

Bought these last year from HK, not available in the US... these are the actual enerland cells which I very much like.... the used packs (10) are all in perfect shape with no puffing... they were used in a low amp draw application and only have 5 or less cycles on them, most have just two or three in Eflite carbon yak plane, and in my Extreme flight Vanquish MKII... these packs gave both models extreme power, and great flight times... I bought them in masses, as when I go to the field, I like having enough batts for a days flying, and then some.. .

I also have (4) brand new packs with no connectors ever soldered...

All of these packs have been in the fridge at storage levels and are very strong packs, with QUALITY cells...

they are listed on rcgroups as well, but figured I would list here too as they would work well in a lot of boat applications.... these would work great instead of running (2) 2s 5000 packs in series... running (2) 4s 3300's in parallel for another 33 percent more runtime, and adding a tad bit of needed weight in the RTR BJ's, UL-1's, Mystics, Geicos, Spartans, Delta force and pursuit monos, etc., etc...

Used packs have deans applied... look how clean the connectors are :) (pefect shape) were $45... now $30 each shipped
New Packs no connectors was $55 now $40 each shipped...
paypal only, I take care of the fees

Enerland 4s 3300's.jpgEnerland 4s 3300 2.jpg

[JMSCARD]

I also have a few like new 2s 3300 matching enerland packs as well, to make for 6s setups... just fyi

[Brushless55]

What kind of balance tabs do they have ?
Thanks

[JMSCARD]

Polyquest, I'm home for lunch and will take a pic of the taps and put them in the pic in the thread brushless:)

[Brushless55]

Polyquest, I'm home for lunch and will take a pic of the taps and put them in the pic in the thread brushless:)

ok and thank you
so are these like the TP tabs then?
and do you know the dimensions of the packs?
may want some for a Heli and others for another project
thanks

[JMSCARD]

http://www.robotcombat.com/products/LP-PQ-3300XP-3S.html

these are same packs yet 3s... I'm not home right now, but they should be 1/3rd taller with the one extra cell... that oughta be about exact.... and yes I believe they are alike the Thunder Power Taps...


but the while brushless... here are two of my favorite toys! one runs on 12s... the other I don't quite know.
daniella heli.....jpg

[JMSCARD]

Drastic Price reduction.... look at original post

[Brushless55]

Ok I have a long day today at work but 6 of the used ones

[JMSCARD]

Brushless I will pm you my paypal addy..... and Tuesdays are my day off, I will get them out today for ya as well. PM en route.

[Brushless55]

Jason, did you say you have matching 2cells ?
I could use them to make 6s for my 500

[JMSCARD]

3300's are big for your 500 aren't they? I run 2200's to max of 3000's in my 500's I have some other packs that would work much better but I do have two as new 3300's 2s enerlands exact match to the 4s left... I wanted to keep one, but have one avail for an extra $15 you can have it..

[Brushless55]

I will take it

[JMSCARD]

2s enerland next ta 4s.jpg2500xp enerlands.jpg2 3s flightpower 2500's.jpghacker 2.jpghacker.jpg


First pic is your 6s setup, its one of the (6) 4s packs you are buying sitting next to the 2s pack you are buying...

other pics are of other batts that would work great for a 500..... the flightpowers are 3s 2500 evo25's and super low use just Velcro goo on them... the enerland xp 2500's I have a bunch of those in 2s and 4s.... those are super low use as well... all my packs have 5 cycles or less... way to many packs basically, I also have some older puffed turnigy's 2650 6s packs and some 2200's 6s outrage packs that are puff... none of my packs shown have been used in helis, just planes... the packs not shown that have actually been used I wont sell as they are just sport flying packs that are for 500's, as you know even flying just big air 3d will puff lipos, hence why I never sell ex heli packs...


Oh and the hacker motor came out of one of my 500's I parted out, I went up to 550's and 600's and have a couple 500's left but I sold two and parted them out... that hyperion motor a40 has the 500 trex pinion in the box and has seen about 15 flights... has some scratches on can from a piece of aluminum I had covering my motor wires from sending signals to my fbl unit came undone and made some little scratches... this motor outperformed my scorpion 3026 in my other 500 by a decent margin... you can buy the motor if you want to :) I'll probably have a moderator on me, but just showing these pics cause your a heli guy!

[Brushless55]

http://www.robotcombat.com/products/...3300XP-3S.html


these are same packs yet 3s... I'm not home right now, but they should be 1/3rd taller with the one extra cell... that oughta be about exact.... and yes I believe they are alike the Thunder Power Taps...


but the while brushless... here are two of my favorite toys! one runs on 12s... the other I don't quite know.
[ATTACH=CONFIG]99817[/ATTACH]

LOL
how did I miss this posting!
to funny bro

[ATTACH=CONFIG]100115[/ATTACH][ATTACH=CONFIG]100116[/ATTACH][ATTACH=CONFIG]100117[/ATTACH][ATTACH=CONFIG]100118[/ATTACH][ATTACH=CONFIG]100119[/ATTACH]


First pic is your 6s setup, its one of the (6) 4s packs you are buying sitting next to the 2s pack you are buying...

other pics are of other batts that would work great for a 500..... the flightpowers are 3s 2500 evo25's and super low use just Velcro goo on them... the enerland xp 2500's I have a bunch of those in 2s and 4s.... those are super low use as well... all my packs have 5 cycles or less... way to many packs basically, I also have some older puffed turnigy's 2650 6s packs and some 2200's 6s outrage packs that are puff... none of my packs shown have been used in helis, just planes... the packs not shown that have actually been used I wont sell as they are just sport flying packs that are for 500's, as you know even flying just big air 3d will puff lipos, hence why I never sell ex heli packs...


Oh and the hacker motor came out of one of my 500's I parted out, I went up to 550's and 600's and have a couple 500's left but I sold two and parted them out... that hyperion motor a40 has the 500 trex pinion in the box and has seen about 15 flights... has some scratches on can from a piece of aluminum I had covering my motor wires from sending signals to my fbl unit came undone and made some little scratches... this motor outperformed my scorpion 3026 in my other 500 by a decent margin... you can buy the motor if you want to :) I'll probably have a moderator on me, but just showing these pics cause your a heli guy!

sorry, had a longer day that I had planed...
so what KV is the motor and how much ya want for that?

[jonjon00]

I'll take two of the used 4s.
PM info for paypal please.