46" mystic style mono

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mattwarner
    Senior Member
    • Aug 2011
    • 487

    #1

    46" mystic style mono

    Hi Guys,

    I am reluctantly considering selling my mono due to expanding family and moving further away from a large enough area of water to use it on (its big and fast!)

    This hull was made by a guy in the UK and looks very similar to the HPR 010 Mono! It was specced with full carbon lower half with carbon deck stripe and hatch, i believe its the only one ever made with this spec due to an issue over copyright.

    It was built by myself and fitted with the following hardware and run 5 times in total.

    Leopard 5682 740kv motor
    Fightercat 16s 300a ESC (inc program box)
    Fightercat alloy motor mount
    HOR Push/Pull rudder
    HOR 1/4 stinger with stepped down flex to 3/16
    HOR turn fins
    Arrow Shark Trim tabs
    Feetech 21kg digital metal gear servo
    6v battery pack

    I am looking for $995 shipped to US less to Europe as I am in the UK.













    [img]http://i1083.photobucket.com/albums/j397/mattwarner1979/IMG_0827.jpg
  • Mattwarner
    Senior Member
    • Aug 2011
    • 487

    #2
    more pics

    battery trays have since been installed and it runs very well on 9s but 12s if your brave! it will also come with an Octura X457 which seems to be a good prop for this.











    Comment

    • miyage007
      Senior Member
      • Mar 2011
      • 171

      #3
      If you decide to part it out, I'll take the esc and the motor mount. Thanks
      Cheers,
      Miyage007
      From Down Under - Australia

      Comment

      • rabosi
        Senior Member
        • Aug 2011
        • 200

        #4
        How would you say it runs and what speed is it set up for?

        Comment

        • Mattwarner
          Senior Member
          • Aug 2011
          • 487

          #5
          Originally posted by rabosi
          How would you say it runs and what speed is it set up for?
          On 9s and a 57mm prop it runs about 55 ish, at the moment I am running 9s and a 52mm prop which is giving me a good sport setup for rough water at probably mid forties and decent run time even on only 1p

          It seems to run well although still playing about with cog and other adjustments so it's hard to say, I just don't have the time (or Lipos) to spend getting her set up properly which is a huge shame

          Comment

          • SSchevy98
            Member
            • Sep 2012
            • 90

            #6
            Just an awesome boat!!

            Esc still for sale ?
            Deltaforce 33" cyberstorm 8s Lehner 2250/9 1315 kv/ Leopard 4082 1250 kv .

            Comment

            • Skullcracken
              Senior Member
              • May 2010
              • 617

              #7
              Originally posted by Mattwarner
              more pics

              battery trays have since been installed and it runs very well on 9s but 12s if your brave! it will also come with an Octura X457 which seems to be a good prop for this.











              In the pic of the motor and mount, is the motor mounted already or just sitting in the hull for photo. Doesn't look like there's room for a collet.

              Comment

              • Mattwarner
                Senior Member
                • Aug 2011
                • 487

                #8
                Sorry these were all build thread pics, everything is glued in and collett is on i think its probably the angle of the photo thats deceptive but definately room for it!

                At the moment i want to sell as a complete package but due to postage uk to the states it would be difficult for me to break and send indivdual components to the US as it would cost the buyer a lot for postage

                Comment

                Working...