FS;Brand new Aeromarine Challenger 31" hull,Speedmasters hardware,Leopard 4082.....

[Karfrik]

Selling everything as a package deal.No individual item offers for now,sorry.

1)Brand new never drilled Aeromarine Challenger 31" hull reinforced with CF.
2)Good almost new used set of Speedmasters hardware(Rudder and adj stinger)
3)Good used Leopard 4082.
4)Brand new motor mount
5)Brand new set of turn fins
6)Good used trim tabs

I would like $295 OBO for everything Shipped conus only.Please take in consideration that shipping all this items can run from $25-35 so guys please do the math.Go check on OSE website for prices on most of the items included here also so you know their original prices.Paypal only.If you need any specific picture or have questions don't hesitate in contacting me, I`ll do my best to reply back ASAP.Thanks for looking....Albert

PRICE REDUCED TO $270 OBO SHIPPED CONUS!!!.......

PD;Be advise that Ill be posting this locally and at another forums during the weekend.Zi6_2098.jpgZi6_2099.jpgZi6_2100.jpgZi6_2101.jpgZi6_2102.jpg

[Karfrik]

Zi6_2104.jpgZi6_2105.jpgZi6_2106.jpgZi6_2107.jpgZi6_2108.jpgMore pics....

[Karfrik]

Zi6_2111.jpgZi6_2110.jpgZi6_2109.jpgZi6_2112.jpgand more....

[Alexgar]

Al what's the kv on the motor ? And would it be available seperatly?

[Karfrik]

Al what's the kv on the motor ? And would it be available seperatly?

Its a 1550kv motor,but as I stated above,would like to try sell the whole thing as a combo.If not you are first in line for the motor!!...

[Alexgar]

A little to low of kv but thanks for your consideration

[DK535]

A little to low of kv but thanks for your consideration

A little low in Kv? What are you talking about?? That's perfect for a 6s setup

[Alexgar]

I meant for me I'm sticking to 4s for now and all the 1800 kv motors I have have a lot of chine walk when propped the way I like, so to low kv for my needs. Sorry to hog your thread Albert but hey free bump

[izcain]

I would be interested in the motor for the right price if you decide to split up.

[Karfrik]

I would be interested in the motor for the right price if you decide to split up.

I hear you,but not yet....stay tuned!!

Common someone make me a good reasonable offer!!

[Hor2012]

What's the size of the stinger. And is there a jacket for the motor?

[Karfrik]

What's the size of the stinger. And is there a jacket for the motor?

Stinger bushing is for a 3/16" propshaft,plus check the pics for overall dimensions on the part itself.Found a waterjacket for it,it doesn look pretty but will probably do the job.Its missing one of the o-ring seals.Will include it in the deal.If anything else lmk...AlZi6_2117.jpgZi6_2113.jpgZi6_2115.jpg

[Karfrik]

Stinger bushing is for a 3/16" propshaft,plus check the pics for overall dimensions on the part itself.Found a waterjacket for it,it doesn look pretty but will probably do the job.Its missing one of the o-ring seals.Will include it in the deal.If anything else lmk...Al[ATTACH=CONFIG]97513[/ATTACH][ATTACH=CONFIG]97514[/ATTACH][ATTACH=CONFIG]97515[/ATTACH]

Forgot to say that this waterjacket wont work with the included motor mount unless you take out the rear motor mount support but I wont recommend that.So either you buy a shorter waterjacket or get another motor mount.Just wanted to clarify!!!....but it will included in the packge deal anyways!!....

[Karfrik]

PRICE REDUCED TO $270 OBO SHIPPED CONUS!!!!......NEED THIS TO BE GONE!!!!!!........Thanks for looking!!

[Shoot to thrill]

I'll take it! Pming