property taxes due sale lipos, motor, vs1conversion kit with electronics new & used

[arnie84]

Vs1 hull leaks needs work- SOLD

Leapord 3650-3900kv runs good-SOLD

Vs1 conversion kit NEW! SOLD!

2 turnigy nano tech v-spec 4000mah 5s 65c NEW!! SOLD

4 packages hpi megabite SC tires pink compound-- SOLD ON RCTECH

Losi 13.5 runs good--SOLD

Reedy 3300kv 540 motor from sc10 used for few races -- SOLD

Reedy sonic 21.5 motor runs good sold on rctech

[arnie84]

20130407_133430.jpg

20130407_131237.jpg

20130407_114018.jpg

20130407_130918.jpg

20130407_113906.jpg

[JimClark]

where does the VS1 hull leak from?

[arnie84]

Leaks in the front defect from manufacturer needs be sanded and glued hopefull a fellow member on here who it used too belong too will chime in. I just have too many projects too mess with it.

[mtbenjamin77]

Leaks in the front defect from manufacturer needs be sanded and glued hopefull a fellow member on here who it used too belong too will chime in. I just have too many projects too mess with it.

Is the VS1 used or new? Has the transom been drilled?

[J.W. Pepper]

[ATTACH=CONFIG]96883[/ATTACH]

[ATTACH=CONFIG]96884[/ATTACH]

[ATTACH=CONFIG]96885[/ATTACH]

[ATTACH=CONFIG]96886[/ATTACH]

[ATTACH=CONFIG]96887[/ATTACH]

Is this the sonic motor your selling?? ... http://www.teamassociated.com/reedy/parts/details/231/ - trying to confirm that it's sensored, thanks.

[arnie84]

Sonic is sensored, vs1 is used.

[dirtnsnowrider]

Leaks in the front defect from manufacturer needs be sanded and glued hopefull a fellow member on here who it used too belong too will chime in. I just have too many projects too mess with it.

This hull was originally built by me. It has been drilled to accept a Pro boat stiletto obl. I know that an o.s. lower and a hyper performance obl will bolt directly on to the rear of the hull. The hull leaks water on the bottom of the hull on the front where the radio box plate was attached. Also the rear of the hull has a leak at the rear bottom side where the hull is joined. I have enclosed 2 pics of my boat pointing to the area where the leaks were noticed. The hull will need to be sanded and then either refinished or primered and painted. Hope this info helps out.

DSCN2428.jpgDSCN2429.jpg

[hypersmash]

Would you sell the ul1 motor and speed o by itself?

[arnie84]

Yea probably $95 shipped have seen others on here fo for $100

[hypersmash]

Is it the 1800 or the 2030kv?

[arnie84]

From ul1 so it must be 2030

[hypersmash]

Humm. Ok how about 85 for the motor, speed control and jacket and I will send it now?

[arnie84]

That's too cheap like I said last combo on here sold for $100

[hypersmash]

You are right. 95 is fair send the paypal.