Tweet
IMG_2683.JPGIMG_2684.JPGIMG_2685.JPGIMG_2687.JPGIMG_2689.JPG
I have found wwII sniper rifle I want BAD so am selling my 60" twin cat with or without engines. More pics in posts to follow.
CF rails, cf transom plate, basecoat clearcoat mercedes colors, 2-dual water pickups installed in bottom of sponsons, all hardware for inside is anodized red, all hardware outside natural aluminum. .
radio box has 3 digital hobbico servos. Steering is 340ozin rated and cost right at $100 all r new never used. Box lid is red plexiglass with red anodized hold down screws.
Hull has large naca duct and reverse clamshell vents installedl The boat will breath WELL. "Also has a set of 1 1/4 holes in rear and the top vents with red paint on top to add to the breathing.
colors on the boat r Mercedes Benz black pearl, deep red pearl, and fast yellow.
Please ck out the additonal pics on posts following this one.
Ok I need to move this boat so have removed the gas engines and engine mounts as part of the deal and replaced with on Proteus 56x112-600kv with high quality all alum custom mount. Pics coming shortly. This boat would be super easy to convert to hv big motor twin. You would already have one motor and mount and would only need 1 more which some of u may already have. As for the round vents in the rear, the naca duct and the 2 smaller ones they could all be closed off from the inside and easily made waterproof> I will even include the cf sheet necessary to cut and make the vent closures!! I will include 2 x460 or larger if u need for the job also. I will include 2 nib 1/4" flex shafts too.
Price is $650 for everything. What is everything, well all hardware seen in the pics minus any gas engine hardware, but all red anodized stuff for completion of scale look, complete arrow shark struts, scale rudder system with standoff, radio box with digital hobbico servo 340oz in power over $100 by its self, 2 new hobbico digitals to use as u please, flex shafts, 2 props possibly already s&b, prop drives, prop nuts, all screws for mounting the hardware and the boat with cowl.
I will even drive 300 miles each way to meet u for pickup if u don't want it shipped. The boat cost me $450 before paint, hardware, motor and mount, cf work inside etc. This is a steal for someone. Can send u any additional pics u may want to make this work. So all u would need is 1 more motor and mount, escs and batteries. I may even have a good deal on some batteries to the buyer if interested. Also will make the buy er a great deal on a multi lipo charger nib too>
I have found wwII sniper rifle I want BAD so am selling my 60" twin cat with or without engines. More pics in posts to follow.
CF rails, cf transom plate, basecoat clearcoat mercedes colors, 2-dual water pickups installed in bottom of sponsons, all hardware for inside is anodized red, all hardware outside natural aluminum. .
radio box has 3 digital hobbico servos. Steering is 340ozin rated and cost right at $100 all r new never used. Box lid is red plexiglass with red anodized hold down screws.
Hull has large naca duct and reverse clamshell vents installedl The boat will breath WELL. "Also has a set of 1 1/4 holes in rear and the top vents with red paint on top to add to the breathing.
colors on the boat r Mercedes Benz black pearl, deep red pearl, and fast yellow.
Please ck out the additonal pics on posts following this one.
Ok I need to move this boat so have removed the gas engines and engine mounts as part of the deal and replaced with on Proteus 56x112-600kv with high quality all alum custom mount. Pics coming shortly. This boat would be super easy to convert to hv big motor twin. You would already have one motor and mount and would only need 1 more which some of u may already have. As for the round vents in the rear, the naca duct and the 2 smaller ones they could all be closed off from the inside and easily made waterproof> I will even include the cf sheet necessary to cut and make the vent closures!! I will include 2 x460 or larger if u need for the job also. I will include 2 nib 1/4" flex shafts too.
Price is $650 for everything. What is everything, well all hardware seen in the pics minus any gas engine hardware, but all red anodized stuff for completion of scale look, complete arrow shark struts, scale rudder system with standoff, radio box with digital hobbico servo 340oz in power over $100 by its self, 2 new hobbico digitals to use as u please, flex shafts, 2 props possibly already s&b, prop drives, prop nuts, all screws for mounting the hardware and the boat with cowl.
I will even drive 300 miles each way to meet u for pickup if u don't want it shipped. The boat cost me $450 before paint, hardware, motor and mount, cf work inside etc. This is a steal for someone. Can send u any additional pics u may want to make this work. So all u would need is 1 more motor and mount, escs and batteries. I may even have a good deal on some batteries to the buyer if interested. Also will make the buy er a great deal on a multi lipo charger nib too>
Comment