Tweet
SOLD!
Bought an Apache C1 Flux RTR brand new, took it out of the box and did the custom graphics on the body. I also installed a nice light setup on it. Will come in original box with all paperwork. $500 Shipped Conus. If bought at this price I will include 2 new Turnigy 2s 5000Mah 30c Lipos!
If I remember correctly, but dont quote me, the Alphastar motor and Q-base esc are made by Castle and are rebadged by HPI for this vehicle
FEATURES: Chassis: Aluminum 0.16" (4mm) thick with composite braces
Drive: Four wheel shaft with front universal dogbones
Motor: Alphastar Flux 2350kV brushless, optimized for 4S LiPo cells
Electronic Speed Control: Q-Base brushless
Radio: HPI 2.4GHz three channel, with waterproof steering servo,
waterproof battery box with built-in transponder mount & antenna
mount, built-in fail safe, drop down steering wheel for added
comfort, steering dual rate, end point adjustments and servo
reverse
Differentials: Spiral cut gears for added durability
Shocks: Aluminum body 16mm Big Bore, oil-filled
Shock Towers: Aluminum
Suspension: Monocoque type suspension arms with front and rear anti-
sway bars
Bumpers: Front and rear flexible short course style
Battery Box: Foam padded, hook and loop closures for quick battery
changes, adjustable to accomodate two battery packs for up to
14.8 volts of power
Steering: Dual bellcrank with aluminum drag link and cam type servo
saver
Ball Bearings: Full set, rubber sealed
Body: Trimmed and painted Desert Racing body with spare tire and
wheel (non-functional) in truck bed, and painted driver and
passemger figures
Tires: Yokohama Geolandar off-road, diameter 4.5" (114mm) with foam
inserts
Wheels: 1.7" (42mm) wide, 2.2" (56mm) diameter, black in color with
simulated beadlock ring
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops of
the tires from vertical when viewed from front or behind vehicle
INCLUDES: RTR Apache C1 1/8 scale Buggy, Radio, Motor, ESC, Body, Tires, Foam
Inserts, Wheels, four AA Cells and Instruction Manual
REQUIRES: Batteries: Two LiPo 7.4V with Deans plugs (at least
4000mAh and 25C discharge rate)
Battery Charger: LiPo compatible
Track and maintenance equipment
SPECS: Vehicle;
Length: 22.9" (580mm)
Width: 11.8" (300mm)
Wheelbase: 14.8" (375mm)
Body;
Length: 21.75" (552mm)
Width: 5.1" (131mm)
Bought an Apache C1 Flux RTR brand new, took it out of the box and did the custom graphics on the body. I also installed a nice light setup on it. Will come in original box with all paperwork. $500 Shipped Conus. If bought at this price I will include 2 new Turnigy 2s 5000Mah 30c Lipos!
If I remember correctly, but dont quote me, the Alphastar motor and Q-base esc are made by Castle and are rebadged by HPI for this vehicle
FEATURES: Chassis: Aluminum 0.16" (4mm) thick with composite braces
Drive: Four wheel shaft with front universal dogbones
Motor: Alphastar Flux 2350kV brushless, optimized for 4S LiPo cells
Electronic Speed Control: Q-Base brushless
Radio: HPI 2.4GHz three channel, with waterproof steering servo,
waterproof battery box with built-in transponder mount & antenna
mount, built-in fail safe, drop down steering wheel for added
comfort, steering dual rate, end point adjustments and servo
reverse
Differentials: Spiral cut gears for added durability
Shocks: Aluminum body 16mm Big Bore, oil-filled
Shock Towers: Aluminum
Suspension: Monocoque type suspension arms with front and rear anti-
sway bars
Bumpers: Front and rear flexible short course style
Battery Box: Foam padded, hook and loop closures for quick battery
changes, adjustable to accomodate two battery packs for up to
14.8 volts of power
Steering: Dual bellcrank with aluminum drag link and cam type servo
saver
Ball Bearings: Full set, rubber sealed
Body: Trimmed and painted Desert Racing body with spare tire and
wheel (non-functional) in truck bed, and painted driver and
passemger figures
Tires: Yokohama Geolandar off-road, diameter 4.5" (114mm) with foam
inserts
Wheels: 1.7" (42mm) wide, 2.2" (56mm) diameter, black in color with
simulated beadlock ring
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops of
the tires from vertical when viewed from front or behind vehicle
INCLUDES: RTR Apache C1 1/8 scale Buggy, Radio, Motor, ESC, Body, Tires, Foam
Inserts, Wheels, four AA Cells and Instruction Manual
REQUIRES: Batteries: Two LiPo 7.4V with Deans plugs (at least
4000mAh and 25C discharge rate)
Battery Charger: LiPo compatible
Track and maintenance equipment
SPECS: Vehicle;
Length: 22.9" (580mm)
Width: 11.8" (300mm)
Wheelbase: 14.8" (375mm)
Body;
Length: 21.75" (552mm)
Width: 5.1" (131mm)
? WHAT RULES?
Comment