FS: OSE built Rigged Insanity NEW

[Diegoboy]

SOLD
New P-spec Rigged Insanity

Specification:
Length 26.9"
Beam 14"
Built by OSE's master boat builder Phil
Laser cut wooden parts
Turn Fin
Carbon fiber booms
Vacuum formed cowl

The following hardware is included:
Speedmaster mini rudder - ros-mini-rud
4-40 Pushrod - dh-4-40
Speedmaster 21 strut - ros-21
¼ brass tubing -p dh-ks-brass-tb
.150 cable assembled - oct-oc150L-24c
water outlet - ose-80895
bulkhead fitting - ose-80898
ose-tubing-1/4-clear
Traxxas 2056 servo - dh-2056
antenna mount
5mm /.150 coupler - aero-coupler

Condition:
100% New, never wet
Sealed and painted
Vinyl decals can be removed easily (not cleared over)

Needed to run:
RX
4s Lipo
Mount turn fin
Pushrod attach and seal
Lock down sponson booms to desired spread.
Prop

Justification:
$420 - OSE 90% built kit (estimation based on the JAE 90% kit)
$180 - UL-1 Power plant
$25 ($40 - $15 stock kit rudder) - Speedmaster mini rudder
$4 ($29 - $25 stock kit strut) - Speedmaster Strut
$16 - 5mm / .150 coupler
-----------------------------
$645+ invested (not counting shipping)

Price:
$550 Shipped CONUS
...all others, please ask

Reason for selling:
Trying to fund a trip to Universal Orlando for my 10yo Daughter

Pictures:

i1.jpg

i2.jpg

i3.jpg

i4.jpg

i5.jpg

[Diegoboy]

Price Drop:
$500 Shipped CONUS
Or Best Offer
...all others, please ask

[Diegoboy]

Final Price Drop:
$400 Shipped CONUS
Or Best Offer
...all others, please ask.

[kacordy]

DiegoBoy,

I'm interested but can you give me more info. I only want to run 4s or larger. I'm not familiar with the power plant and will it handle 4s?
What size battery will fit in the hull? What prop would work well? How fast will actually run?
I live near Redding California so I'm very close for shipping
Do you accept PayPal?

Thanks, Allen

[Diegoboy]

Yes I accept PayPal. Its made for 4s oval racing. A 4s 5050mAh lipo fits in with plenty of room to spare.
I would run her on the 1450 mod prop

http://zippkits.com/~zippkits/index.php?main_page=product_info&cPath=8&products_id=188

[Diegoboy]

FYI:
The above boat for sale was built by OSE Phil (the guy that builds all the OSE JAE riggers in the store)
A new kit was purchased and built resulting in the above boat for sale.

Below is my previous insanity that was destroyed. THESE are two different boats built from two different kits.

[kacordy]

Question

DB, Interesting to see the destroyed boat. Is the motor and ESC in the boat for sell out of the crashed boat? Have the electronics in he new boat been submerged in water?
Thanks, Allen

[Diegoboy]

The destroyed boat never got a real run. I set her in the water, and she started out to about 10 ft away when someone in my club turned on his radio to the same channel. She stopped dead in her tracks. (10 ft away) . I started to wade in the water to my boat when the other guy told me to turn off my radio. I did, and she took off into the shore behind me. The innards had very little water in her because her entire 10 ft run lasted a half a second and she ended her life on dry land
Yes, the power and hardware were donated to her sister. No damage was done behind the first three/four inches of the boat. The lipo was the front most component, and I'm keeping that because its fine.

[kacordy]

DB, in your original first for "sell post" you represent that everything is new and apparently this is not
the case. Now you state that all the electronics have been wet in the unfortunate shore crash, is the ESC and motor ok and does it still run?

[Diegoboy]

Everything I said is in the op and after is true. The electronics did not get wet. The electronics have about 3 seconds of run time total. My lipo is the only thing that got splashed on and its fine and I'm keeping it. The ESC is encapsulated so it can get wet without causing harm ( but again it didn't get wet) the UL1 ESC isn't your typical turnigy crap that sizzles when wet. Even the new (3 second) servo is waterproof.
The electronics get more of a workout on the bench at the factory.
Yes everything is 100% operational.
In late summer, I intended to run her so I packed her up, recharged the lipo and noticed I didn't mount the turnfin . So I shelved her till now.

My outboard tunnel has a UL1 motor mounted on the back.
That, and all other electric outboards willl submerge their motor completely in a flip and run the next heat and season without problems.

[egneg]

I was there when the unfortunate accident happened and everything Danny said is true. He is a standup guy and would never lead anyone astray to make a sale.

[Diegoboy]

thank you Chuck. the deadline for the trip is getting closer I may get to keep this one.

[kacordy]

I will take it

thank you Chuck. the deadline for the trip is getting closer I may get to keep this one.

Danny, thank you for clarifying everything. I will be home tonight after 7pm and will be able to complete the Paypal for you and pass on all my shipping info. Can you please give more detail on which props to run, part numbers and where to buy.

Thanks, Allen

FYI, I took the family for a week to Orlando, Disney and Universal. You will be shocked. Make sure you take the 140mph, $100 or so stock car ride around the 1.5 mile track at Disney. They built the track for Indy cars but its now a Richard Petty driving school.

[egneg]

The 1450 mod prop he gave a link to is a good prop for this boat. You may also consider the ABC H7 that you can get in the OSE store.

[Diegoboy]

You're welcome. Sorry for any confusion.