For sale proboat miss llumar electric 1/8

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • eagle1
    Member
    • Mar 2011
    • 44

    #1

    For sale proboat miss llumar electric 1/8

    Up for sale is my Pro boat 1/8 gas LLumar converted to electric. I converted it from gas to electric but its neverseen water after the major over haul. It was in excellent condition before the build and was never abuse or
    crash. This build was base on one of Randy's builds (BBY). He sent all the info to me for the build and ones
    finish, it should haul but. I just don't feel conferrable with the electrical part of it. Its set up to run 10s2p. But it could
    be done as 12s2p! The first time i connected the power as 10s2p it made me jump back because of
    the electrical spark and sound. I sent the esc back to steve and got a new one back. And i haven't mess with it since.
    The motor is the little screamer out of Oregon . The esc is the swordfish 240 HV and come with the linkerThe steering servo is a hobico high torque titanium gear. The boat comes with two sets of batteries (8), turnigy 5000 mah 25c. The boat
    was done up in Dupont base coat clear coat yellow and white. It was first covered in epoxy black then painted. The esc also comes with the usb linker and disk. This boat is not for someone just getting into boating. Its for the guy that
    has been doing electric boat for a while charging lipo batteries and so forth. Lipo batterers are not for the faint of hart! I don't even like them being in my garage! Im asking 700.00 plus ship on the boat. I will except paypal or cashier
    check. I will ship the batteries separate at my coast to same address. The boat will be pack well before shipping. I willnot ship out side of conus on this one. Sorry guys. Feel free to ask any question. Thanks and Semper FI

    Price reduce 500.00 plus ship. I also found velcro to strap the batt in and some of the cables to run the batt form the sponson to the center of the boat. Thanks
    [ATTACH=CONFIG]84690[/ATTACHDSC05010.jpgDSC05016.jpgDSC05012.jpgDSC05013.jpg
    Attached Files
    Last edited by eagle1; 09-20-2012, 11:50 PM. Reason: price reduce
  • JMSCARD
    Fast Electric Addict!
    • Mar 2010
    • 3444

    #2
    shipping cost to 05679?

    Comment

    • eagle1
      Member
      • Mar 2011
      • 44

      #3
      Hi via USPS its about 70.00 bucks. The box weighed in at 18lbs. I have it pack and i had to keep the lid out wouldnt fit. I will ship lid and the batteries in two
      separsate boxes wont cost you anything to ship these. Thanks

      Comment

      • woodster
        Senior Member
        • Feb 2011
        • 430

        #4
        I would be interested in the batteries by themselves if you happen to part it out. Thanks

        Comment

        • eagle1
          Member
          • Mar 2011
          • 44

          #5
          ok there is one other that ask about the batteries. Will keep you in mind. I would really hate to part out. Especially for the price! There's three bills just in paint!
          Thanks
          Semper fi

          Comment

          • woodster
            Senior Member
            • Feb 2011
            • 430

            #6
            Originally posted by eagle1
            ok there is one other that ask about the batteries. Will keep you in mind. I would really hate to part out. Especially for the price! There's three bills just in paint!
            Thanks
            Semper fi
            Those are 5S batteries, correct? Thanks

            Comment

            • JMSCARD
              Fast Electric Addict!
              • Mar 2010
              • 3444

              #7
              Does the package come with a prop? if not do you know what Randy Suggested?

              Comment

              • eagle1
                Member
                • Mar 2011
                • 44

                #8
                I couldnt find the paper work that had the info on it when i bought his gear. I remember that that shaft is reduce from 1/4 to 5/16. So the prop is not you
                typical quarter inch hub. I do remember him saying that it is a conservative size and as i learn the boat and temps to increase the sizes for more speed. I sure if
                you call him he's more than willing to share that with you. Thanks
                Semper Fi

                Comment

                • Punisher 67
                  Ignore list member #67
                  • May 2008
                  • 1480

                  #9
                  Originally posted by eagle1
                  shaft is reduce from 1/4 to 5/16.
                  I think you mean 1/4 to 3/16
                  Necessity is the mother of invention.............

                  Youtube Video's http://www.youtube.com/user/Titanis2000

                  Comment

                  • eagle1
                    Member
                    • Mar 2011
                    • 44

                    #10
                    Ops good catch your right 3/16 Thanks

                    Comment

                    • lenny
                      Fast Electric Addict!
                      • Sep 2010
                      • 4294

                      #11
                      Hi,
                      What kv is the motor ?
                      ? ONLY IF THEY WORK

                      My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

                      Comment

                      • JMSCARD
                        Fast Electric Addict!
                        • Mar 2010
                        • 3444

                        #12
                        just helping here as I keep looking at this boat myself.... I believe unless its a special wind the screamers were 650kv,... correct me someone if I am wrong.

                        Comment

                        • runzwithsizorz
                          Senior Member
                          • Jan 2009
                          • 896

                          #13
                          Originally posted by lenny
                          Hi,
                          What kv is the motor ?
                          Hmmm, 10s, or 12s, dimez to donutz, I would bet it'z this one Lenny; http://forums.offshoreelectrics.com/...t-runner-Motor

                          Comment

                          • eagle1
                            Member
                            • Mar 2011
                            • 44

                            #14
                            Thanks for the question guys. Its making me fine my notes. It is 650kv plus 8 pole. Randy had told me in his testing on his proboat that he had run it on 13 or 14s. I didnt really know what he meant and kinda still dont. So there it is. Thanks.

                            Comment

                            • lenny
                              Fast Electric Addict!
                              • Sep 2010
                              • 4294

                              #15
                              Is the motor new or used ?

                              Thanks for the info guys.
                              ? ONLY IF THEY WORK

                              My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

                              Comment

                              Working...