t600 motors, seaking 120s, couplers, etc

[iridebikes247]

all.jpgmotors.jpgspeed control.jpg


#1- Turnigy t600 outrunner mint condition, SOLD

#2- Turnigy t600 outrunner used condition, PRICE DROP, $35

#3- Turnigy t600 outrunner used condition, $25. Story on this motor, my dremel slipped when working on the boat and cut into one of the motor wires and cut a few of the wires. I tested the motor outside of the boat and it ran fine but I have NOT tested it under load in a boat. Motor outer casing is also scratched up badly but no way affects motor performance/structure. Motor responds perfectly to throttle inputs, this would be a great test motor for new projects.

Note: The second and third t600 motors in this listing lack the C-clip usually attached under the coupler. This is a non issue if you purchase a thrust bearing, I have used several of these motors and a thrust bearing is an absolute MUST as the tiny clip takes quite a bit of strain without one. Thrust bearing will be supplied with purchase ($10 value in OSE store). Also listed prices do not include shipping.


2 couplers 6mm to .187-$6 each



Speed controls listed

2 Seaking 120a- SOLD

[b20btec]

KV rating onthe Turnigy T600?

[keithbradley]

I'll take the seaking 120s...any deal if I buy both?

[iridebikes247]

Hey the motors are 1400kv. I think the escs are a fair price at 40 each they have castle 5.5 connectors on them. Will part out as people wish.

[LOVE6S]

Next in line for esc's please.

[iridebikes247]

Hey ILOVE6S, escs are yours if Keith doesn't want them. Will let you know by tonight.

[keithbradley]

Next in line for esc's please.

LOVE6S,
How bad do you need them?
I think $40 each is a fair deal and I was going to buy them just to throw in my box with the other 6 I have for now...if you need them for a current project or something though I'll bow out and let you pick them up.

[LOVE6S]

LOVE6S,
How bad do you need them?
I think $40 each is a fair deal and I was going to buy them just to throw in my box with the other 6 I have for now...if you need them for a current project or something though I'll bow out and let you pick them up.

I could use them for a project I am gona do down the road, its up to you keith, I will use them, Shawn.

[keithbradley]

I could use them for a project I am gona do down the road, its up to you keith, I will use them, Shawn.

If you want them and can pay him today, go ahead.
If you don't, let me know and I will buy them today.

[LOVE6S]

Ok I will take rhe esc's, the mint motor, two of the better couplers and the two thrust bearings, send PP and total please, Shawn.

[iridebikes247]

Hey Keith and LOVE6S, whatever you guys decide let me know what kind of connectors you'd like on the esc battery pos/neg. Will get to soldering stuff up tonight and ready to ship asap.

[b20btec]

Hold up on the motor, I asked about them first.

[b20btec]

I'll take the newer motor and a coupler, 51.00

[iridebikes247]

b20btec, motor is yours will pm you payment info.

[LOVE6S]

I will take just the esc's with 5.5mm all the way around, set up like you have in the pic please, PM me your PP and I will pay you ok, thanks.