Tweet
I'm just about finished with my custom Mystic but now have decided to dump money into something else. I Bought the stock boat new on April 16th 2012, Ran it on the lake 4 times and decided that the 35mph wasn't fast enough so I started researching how to make it go fast. My goal was to hit low to mid 50mph.
It needs to be painted, I filled in the factory water pickup hole in the hull along with the antenna hole. Those 2 places have been lightly sanded smooth with 600 grit. The boat needs to be painted, a new better location for the antenna drilled and the push rod hole drilled out to 7/16" for the Du-Bro seal. Parts wise this boat needs nothing, I have everything. I checked paypal receipts and everything in pictures came to $1,191.52 I sold the stock motor and esc so $1,061.52 is what I have into its current state.
I do not want to sell anything seperate, sold as whole package. Complete Custom RTR
The hull has been stripped of all the balsa wood and a 17"x20" Carbon fiber mat laid up and epoxy'd for strength and looks.
All the updated parts are brand new and never ran. (sad I know) But I think its worth more never ran so I'll hold back on putting it into the water.
The Parts list:
Fightercat 4050 tp comp series 2200kv 4082 brushless motor
HRC TP 40mm cooling jacket 63.5mm long
HRC 40mm universal motor mount
SeaKing 180A ESC v2 with added cap bank
Stock proboat radio and receiver 2.4 ghz MR200
OSE Aluminum servo mount
5.5mm bullets throughout
Zippy 4s 5000mah 45c batteries (2) New still factory wrapped on bullets.
Kintech hatch locks
Kintech hull water pickups and outlets (seperate for motor and esc)
Tiqueman custom epoxy hatch cover
.187 Flex cable
Self locking prop nut
Kintech greaseable strut bushing
TFL 445 cnc machined prop
Octura long 5mm collet
Seaking program card
Trak power temp gauge
Hobbyking cell checker
Miscellaneous:
100' hatch tape
Spare 5.5mm bullets and covers
Magnetic prop balancer
Stock .150 flex cable with teflon tube
Hobbyking 3A 5V UBEC
Turnigy Accucel-6 battery charger with power adapter
Random series and parallel wiring mostly deans and balance adapters.
Proboat marine grease with pump
Lipo charge bag
Stock motor mount, hardware and collet
All booklets that came with stock boat and charger.
Im sure that I have missed some things but that about sums it up.
I have to stock hatch (flipped and cracked it on 4th run stock) tupperware lid that no longer fits, bubble is deformed from heat gun but its freebee that came with epoxy hatch.
$750 Shipped
(US only, shipped in factory box UPS)
IMG_20120628_160137.jpgIMG_20120628_160235.jpgIMG_20120628_160252.jpgIMG_20120628_160336.jpgIMG_20120628_160501.jpg
It needs to be painted, I filled in the factory water pickup hole in the hull along with the antenna hole. Those 2 places have been lightly sanded smooth with 600 grit. The boat needs to be painted, a new better location for the antenna drilled and the push rod hole drilled out to 7/16" for the Du-Bro seal. Parts wise this boat needs nothing, I have everything. I checked paypal receipts and everything in pictures came to $1,191.52 I sold the stock motor and esc so $1,061.52 is what I have into its current state.
I do not want to sell anything seperate, sold as whole package. Complete Custom RTR
The hull has been stripped of all the balsa wood and a 17"x20" Carbon fiber mat laid up and epoxy'd for strength and looks.
All the updated parts are brand new and never ran. (sad I know) But I think its worth more never ran so I'll hold back on putting it into the water.
The Parts list:
Fightercat 4050 tp comp series 2200kv 4082 brushless motor
HRC TP 40mm cooling jacket 63.5mm long
HRC 40mm universal motor mount
SeaKing 180A ESC v2 with added cap bank
Stock proboat radio and receiver 2.4 ghz MR200
OSE Aluminum servo mount
5.5mm bullets throughout
Zippy 4s 5000mah 45c batteries (2) New still factory wrapped on bullets.
Kintech hatch locks
Kintech hull water pickups and outlets (seperate for motor and esc)
Tiqueman custom epoxy hatch cover
.187 Flex cable
Self locking prop nut
Kintech greaseable strut bushing
TFL 445 cnc machined prop
Octura long 5mm collet
Seaking program card
Trak power temp gauge
Hobbyking cell checker
Miscellaneous:
100' hatch tape
Spare 5.5mm bullets and covers
Magnetic prop balancer
Stock .150 flex cable with teflon tube
Hobbyking 3A 5V UBEC
Turnigy Accucel-6 battery charger with power adapter
Random series and parallel wiring mostly deans and balance adapters.
Proboat marine grease with pump
Lipo charge bag
Stock motor mount, hardware and collet
All booklets that came with stock boat and charger.
Im sure that I have missed some things but that about sums it up.
I have to stock hatch (flipped and cracked it on 4th run stock) tupperware lid that no longer fits, bubble is deformed from heat gun but its freebee that came with epoxy hatch.
$750 Shipped
(US only, shipped in factory box UPS)
IMG_20120628_160137.jpgIMG_20120628_160235.jpgIMG_20120628_160252.jpgIMG_20120628_160336.jpgIMG_20120628_160501.jpg
Comment