Ammo 1800 KV Brushless Motor and Water Jacket

[LiPo Power]

Motor SOLD !!!!



Price drop to $50.00 plus shipping!!!


I have used 3 times in new condition, still under warranty, Ammo 1800 KV motor with installed water jacket and 5.5 mm connectors.
It was tested on DF-29 copy powered by 4S only.
Very good, officient and well working motor.
Need to sponsor another project so it is up for sale.
Price $75.00 shipped Canada and US or local pick up in Mississauga.
Paypal only.

Specs:

Motor Diameter: 1.42" (36mm)
Motor Length: 2.2" (56mm)
Shaft Diameter: .197" (5mm)
Shaft Length: .591" (15mm)
kV Rating: 1800 rpm/V
Weight: 10oz (283g)
Input Voltage: 14.8-22.2V
Max. Constant Current: 50A
Max. Surge Current: 90A
Max. Constant Watts: 1110W
No Load Current: 1.9A

[LiPo Power]

$65 bucks gets it....

[LiPo Power]

Needs to go, $60.00 shipped!!

[LiPo Power]

New price is $50.00!!! plus shipping.

[swanny454]

Will this fit in my MG and will it increase the performance over the stock 1500 by very much?

[lenny]

Yes it will, But you may need a bigger esc.
Is your esc the stock 45amp ?

[swanny454]

I just bought a 125 ESC to put in it

[lenny]

Than you should be good to go,
Like the stock mystic setup and a little head room for propping up a little.

[swanny454]

How much will I gain with the 1800 verse the stock 1500?

[lenny]

I am not sure,
It all depends on how well you can set the bout up to run,
And also prop choice.

[LiPo Power]

I run my boat on BJ-26 motor, 120amp esc, 4S and M-645 prop. Perfect set up in my case. Steady speeds 35-37MPH, no temps to worry about and long enough run time to finish the race.
This motor was installed on my DF-29 copy to see what can I possibly gain by going to 1800KV and more solid motor.
This time I was able to push 43-47 MPH but not long enough to finish the race ( more amp draw ) and temps were a little higher. When I was trying it on smaller prop, X642 SBP my boat was very stable, little faster than 37mph and no temps to worry about.
So IMO it will work perfectly on MG and yes you will get better speeds out of it.
My MG is upgraded same way and it goes!!!
I hope this helps....

[LiPo Power]

Yes and Yes

Will this fit in my MG and will it increase the performance over the stock 1500 by very much?

[LiPo Power]

Bump this motor....

[swanny454]

I will do $ 50 shipped. Can PayPal it right away. Let me know. Thanks

[LiPo Power]

You got it friend....
PM sent....

I will do $ 50 shipped. Can PayPal it right away. Let me know. Thanks