F/S Skunkworks 30" Catamaran w/ TWIN set-up...

[txboatpilot]

Up FOR SALE!!! TWIN--- Skunkworks 30" Catamaran I put together a couple months back... I only ran it 5-6 times... Once with SV27 motors and esc's on 4S lipo each... Also ran Ammo 2300's and Turnigy 80A esc's on 4S lipo each... Both set-ups ran great, I ran CF40mm counter rotating props.... The electronics have been removed, with the exception of a Hitec HS-475 servo and ProBoat radio and reciever out of a BJ26... All the hardware is SV27, the SV stingers have been shortened 1/4"....All the sticker are removable and I can do it upon request... The f/shaft tubes are made for .150 cable,,, so if you ever want to upgrade to bigger power and larger f/shaft, you can do it with out modifing the hull!!


1. Skunkworks 30" Cat w/ SV27 hardware and .130-3/16 f/shafts, OSE motor mounts, Hitec HS-475 servo, ProBoat BJ26 Radio and receiver.....
ASKING $210 shipped.....

Paypal only please.....



You will need the following to run::: 2x motors and esc's, 2x .130 couplers, 2x CF40mm R&L props, and batteries....

More picts......

[Doby]

Did you ever Vid/ GPS it ???

[txboatpilot]

Did you ever Vid/ GPS it ???

No video, but I did gps it with the SV27 motors and esc's on 4S1P 3700mAh 25C lipos on each esc... It ran 38.6mph with CF40mm props, evrything was under 105deg on temps... I could have tried larger props, but never got to it..

[txboatpilot]

Going to ebay tomarrow!!!!

[txboatpilot]

On EBAY!!!!!!

[lomdel]

Tx, you sold this cat already?

[txboatpilot]

Ya sorry its GONE!!