MHZ Mystic M C5000 114cm - NEU Castle 1717 Motors

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nata2run
    customcfparts.com
    • Nov 2011
    • 1837

    #1

    MHZ Mystic M C5000 114cm - NEU Castle 1717 Motors

    MHZ Mystic M C5000 114cm, NEU Castle 1717 Motors, Swordfish Esc's, CNC Carbon mounts,
    Metallic Silver Pro Paint & much more.

    SOLD!!!

    Up for sale is my beauty. (I’m wanting to build the 138cm version and need the funds)

    MHZ Mystic M C5000 114cm Carbon Kevlar fully loaded with the following:

    2 x CC 1717 - 1580kv with custom modified carbon look cooling jackets.
    2 x Swordfish 240HV ESC’s carbon look, covered with liquid electrical tape for waterproofing.
    Custom made CNC 3.5mm Carbon Fiber mounts for rudder servo, esc’s batteries & GPS.
    2x Turnigy nano-tech 5000mah 6s 65~130C Lipo Packs
    Spectrum S6070 low profile servo with aluminium hardware.
    Spare prop/drive shaft (complete, 3/16)
    X447 L/R props. (119.5km/h on 6s with 4518/3)
    Flex shaft saver (with grease fittings & bearing)
    200+ hours invested in this project. (you can look up the build here on OSE)

    All electric cables and hoses have protecting nylon mesh wire applied for protection.
    All batteries and esc are fitted with male/female 5.5mm bullet connectors.

    This boat is painted in 2pack Metallic Silver with clear coat & metallic clear decals.(not

    permanent) She’s a real stunner!! NO CHIPS OR DINGS! 100% OK

    I am willing to ship worldwide. (Economy Class) Buyer pays difference for EMS

    Open to offers with/without electronics
    Price is $3780.00 US Shipped!
    $2900 without esc and motors

    Price reduced to $3500 US complete RTR no radio though!
    All decals can be removed!!


    Will accept only PayPal only.


    MYSTIC.jpgMHZ Mystic - lake.jpgMHZ Mystic - lake2.jpgMYSTIC - Inside.jpgMYSTIC - Carbon.jpg
    Last edited by nata2run; 06-27-2012, 10:39 PM.
    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
    "Follow someone's footsteps and you will always be a step behind"
  • BW won
    Senior Member
    • Mar 2012
    • 160

    #2
    Jaw dropping boat! GL with the sale.

    Comment

    • Make-a-Wake
      FE Rules!
      • Nov 2009
      • 5557

      #3
      Wow...............awesome boat there!!!! Hope it sells for ya
      NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

      Comment

      • nata2run
        customcfparts.com
        • Nov 2011
        • 1837

        #4
        Thank you guys for the kind support, I hope I can soon start the new project. Will be sad to see it go though.
        Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
        "Follow someone's footsteps and you will always be a step behind"

        Comment

        • nata2run
          customcfparts.com
          • Nov 2011
          • 1837

          #5
          Chris, All video is on my youtube channel (listed in my signature) but here is a direct link to the latest video

          112km/h or 70mph on 6s, it should handle 7s or maybe 8s
          Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
          "Follow someone's footsteps and you will always be a step behind"

          Comment

          • JimClark
            Fast Electric Addict!
            • Apr 2007
            • 5907

            #6
            Guy's please take the chit chat to another forum
            "Our society strives to avoid any possibility of offending anyone except God.
            Billy Graham

            Comment

            • nata2run
              customcfparts.com
              • Nov 2011
              • 1837

              #7
              New speed record of 119.5 with 4518/2 LR Propshop

              Any offers welcome!

              Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
              "Follow someone's footsteps and you will always be a step behind"

              Comment

              • nata2run
                customcfparts.com
                • Nov 2011
                • 1837

                #8
                Looks like a found use for the ESC's

                Will sell without ESC'c for $3,350.00
                Will also include the 4518/2 LR Propshop


                This boat has about 10 runs on it and 100% OK
                Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                "Follow someone's footsteps and you will always be a step behind"

                Comment

                • nata2run
                  customcfparts.com
                  • Nov 2011
                  • 1837

                  #9
                  Will sell without motors and esc's for $2900
                  Shipped anywhere. That's the price for hull, hardware and paint. All time invested is for free.
                  Last edited by nata2run; 05-20-2012, 07:25 PM.
                  Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                  "Follow someone's footsteps and you will always be a step behind"

                  Comment

                  • nata2run
                    customcfparts.com
                    • Nov 2011
                    • 1837

                    #10
                    Guys, open to any realistic offers with/without electronics.

                    1380mm nearly complete!!
                    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                    "Follow someone's footsteps and you will always be a step behind"

                    Comment

                    • TINY
                      Senior Member
                      • Aug 2011
                      • 176

                      #11
                      Nice bit of kit, looking forward to the next project.. I'm sure someone out there without a limp throttle finger will snap up an awesome deal...lol

                      Comment

                      • nata2run
                        customcfparts.com
                        • Nov 2011
                        • 1837

                        #12
                        Still for sale, price reduced to $3500 US complete RTR no radio though!
                        Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                        "Follow someone's footsteps and you will always be a step behind"

                        Comment

                        • nata2run
                          customcfparts.com
                          • Nov 2011
                          • 1837

                          #13
                          sold!!!
                          Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                          "Follow someone's footsteps and you will always be a step behind"

                          Comment

                          • Chrisg81983
                            Fast Electric Addict!
                            • Jul 2011
                            • 1556

                            #14
                            Wahooooooooooooooooooooooooooooooo
                            my youtube videos http://www.youtube.com/user/chris81983?feature=mhee

                            Comment

                            • srislash
                              Not there yet
                              • Mar 2011
                              • 7673

                              #15
                              All right!!! What's the next size up from 138

                              Comment

                              Working...