Genesis Hull and Hardware $185.00 shipped

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • maddmatt
    Banned
    • Jun 2011
    • 211

    #1

    Genesis Hull and Hardware $185.00 shipped

    Up for sale is a Genesis hull and hardware. Its been converted to one piece .150 flex and 3/16 shaft. Also hull has been resin coated and resin ballast added to the frt of the hull. I set it up for SAW and did only several passes. Boat has never been crashed. It is the same condition as I got it. Comes w/ hull, hardware, .150 flex, dog, stock prop and nut. What I did is change the strut to 3/16 teflon bushing, resined hull, added 6 screws for hatch and a seal. It doesn't come w/ motor mount rings. Its a nice boat. I'm selling because I can't get the speeds I want w/o stepping up to a HV setup or buying a lower KV motor. 4092 on 5S would rock!! I'm building smaller boats using a higher kv setups. $175.00 shipped USA. CA. will slightly more because of shipping. PS the resin added to the hull has a few lumps because it started to setup faster than expected. Its not bad. Shipped in the USA only!!!

    100_0043.jpg100_0042.jpg100_0044.jpg100_0045.jpg
    Last edited by maddmatt; 04-27-2012, 12:23 AM.
  • cyprus31
    Senior Member
    • Jun 2011
    • 140

    #2
    How much for shipping outside USA to Cyprus

    Comment

    • mtbenjamin77
      Senior Member
      • Jul 2010
      • 761

      #3
      Genisis Hull and Hardware

      What is the overall length of the flex shaft (tip to tip) and was it setup for a 40 series motor?

      Comment

      • maddmatt
        Banned
        • Jun 2011
        • 211

        #4
        I really don't want to send it out of the country. Where is Cyprus?? Greece? Sorry! Should have posted USA only. THanks, MM.

        Comment

        • maddmatt
          Banned
          • Jun 2011
          • 211

          #5
          The shaft is 12" long. It ran a leo 4082 2200kv motor. The collet used was the same one from FC 5mm to .150/4mm model. Its longer than some of the other brands. Get one of those or close and hook up a 40 series motor w/ no problems. Thanks, MM.

          Comment

          • Karfrik
            Fast Electric Addict!
            • Jun 2009
            • 1177

            #6
            willing to trade?...i have an Aeromarine hydro posted here.Look under my threads im about to bump it...lmk....Al

            Comment

            • maddmatt
              Banned
              • Jun 2011
              • 211

              #7
              Hi, I looked at your boat early and it looks nice. But I want to run smaller boats, LV only. Thats why I'm selling my genesis. Genesis runs great but I need to up it HV to get the speeds I want. Thanks for the offer,going to pass, Matt.

              Comment

              • aminoacid
                Senior Member
                • Nov 2011
                • 125

                #8
                what speeds were you getting with th 4082 2200kv (you didnt mention 4s or 3 s....?)
                do you have pictures of the resin job you did/imperfection?
                thanks

                Comment

                • Karfrik
                  Fast Electric Addict!
                  • Jun 2009
                  • 1177

                  #9
                  Originally posted by maddmatt
                  Hi, I looked at your boat early and it looks nice. But I want to run smaller boats, LV only. Thats why I'm selling my genesis. Genesis runs great but I need to up it HV to get the speeds I want. Thanks for the offer,going to pass, Matt.
                  No problem...good luck with your sale,Al

                  Comment

                  • izcain
                    Senior Member
                    • Mar 2012
                    • 274

                    #10
                    Looks clean. If I had the funds I would snatch this. Good luck with the sale.
                    CF Fightercat Daytona, 21 year old Hitec Sea Nymph, Genesis and many more to come im sure.

                    Comment

                    • maddmatt
                      Banned
                      • Jun 2011
                      • 211

                      #11
                      100_0082.jpg100_0080.jpg Photos of the weight in kg. and the slight lumps in resin Also price lower to $160 shipped in the US. CA will be $10 more Sorry, Matt

                      Comment

                      • aminoacid
                        Senior Member
                        • Nov 2011
                        • 125

                        #12
                        any other hardware included besides prop and flex? collet?

                        Comment

                        • maddmatt
                          Banned
                          • Jun 2011
                          • 211

                          #13
                          No Extra hardware Sorry

                          Comment

                          • izcain
                            Senior Member
                            • Mar 2012
                            • 274

                            #14
                            pm sent!
                            CF Fightercat Daytona, 21 year old Hitec Sea Nymph, Genesis and many more to come im sure.

                            Comment

                            • maddmatt
                              Banned
                              • Jun 2011
                              • 211

                              #15
                              More photos for customer100_0086.jpg100_0085.jpg100_0083.jpg

                              Comment

                              Working...