Motors/ESC/MISC Blow Out!!!

[goldendesign04]

GETTING OUT OF HOBBY SALE
Due to my companies taking way too much time an my wife finally agreeing to let me race motorcycles again, I am blowing out most of my hobby stuff. Everything listed must go! I have to be able to pay for tires some how . Mostly everything here is new unless otherwise specified, which means I payed full retail, my loss your gain! Prices are as marked will accept Paypal/Certified Bank or Cashiers checks. Shipping prices included are to contiental US will ship elswhere for additional charge. PM if you have questions or want additional pics.
Watch my other postings here as I get home more will be put up!

ITEMS
1. Lehner Basic 5300kv brushless (just "refreshed" by lehner) w/ 3/16" coupler and ETTI carbon "like" water jacket $80 Shipped

2. ETTI 125A ESC *NEW* $100 Shipped

3. H&M 200A ESC *NEW* $55 Shipped

4. KB45 8XLkv w/Aluminum water jacket, .187 coupler and Aluminum mount $50 Shipped

5. PolyQuest Balancer 2s-4s adaptors $15 Shipped

6. 10 pair Deans connectors *NEW* w/shrink tubing $15 Shipped

7. Assortment Gold bullet connectors *NEW* (3pair) 5.5mm, (2pair) 4mm, (3pair) 3.5mm $10 SHIPPED!

8. Voltage checker *NEW* $5 shipped

9. Top Flight Balancer *Used 3 times* $10 shipped

Thats the first batch, look for my other posts with hulls, chargers an so on....

-Wayne
PM me here or email: [email protected]

photos of rest of items

here ya go.

ALSO HERES AN UPDATED LIST

1. Lehner Basic 5300kv brushless (just "refreshed" by lehner) w/ 3/16" coupler and ETTI carbon "like" water jacket $80 Shipped SOLD pending payment

2. ETTI 125A ESC *NEW* $100 Shipped SOLD

3. H&M 200A ESC *NEW* SOLD

4. KB45 8XLkv w/Aluminum water jacket, .187 coupler and Aluminum mount $50 ShippedSOLD Pending payment

5. PolyQuest Balancer 2s-4s adaptors $15 Shipped

6. 10 pair Deans connectors *NEW* w/shrink tubing $15 Shipped Sold

7. Assortment Gold bullet connectors *NEW* (3pair) 5.5mm, (2pair) 4mm, (3pair) 3.5mm Sold

8. Voltage checker *NEW* $5 shipped

9. Top Flight Balancer *Used 3 times* SOLD

Heres some of my hulls for sale continuing the blow out sales of my hobby stuff.

1. Graupner Silver Bullet Rigger Aprox 22" with hardware. comes with fullers hardware polished and sharpened, turn fin, motor mount, steering servo. Very clean little rigger ran great on 2s1p lipo an the lehner motor I have listed in a previous post. Paint was done by me, not the best but in the water she looks great! Two little chips on both sponsons in the paint from transporting, other than that flawless little boat!
$150 shippedTrade in the works

2. Toysport Triton Aprox 32"his was Taylor Shaws beau, functional balast chamber, JR race servo, Alumin adjustable trim tabs, aluminum tunr fins, custom battery tray. Blue printed hull, custom cadillac graphics only one small blemish on side repaired proffesionally. I never did get around to running this one so it comes to you as it did to me!
$175 Shipped Sold pending payment

With these I am willing to entertain ALL offers. Again paypal/bank or cashiers checks accepted.

Thank you for looking.

-Wayne

triton pics

This seems to be the last of it that Im going to be putting up for sale. Thank you all for your quick responses. Again will accept paypal
Pm me with inquiries or when you want a piece. First come first served so ask quick these will go fast I imagine

First up the hardware:

1. Aeromarine .45 Rudder assembly $25 Shipped Sold pending payment

2. Aeromarine Stainless strut assembly 3/16 $15 Shipped Sold payment pending

PROPS

1. Octura Y535 Balanced,thinned,sharpened and cupped (proffesionally worked by DASBOATA) $15 shippedSold pending payment

2. Octura X440 Raw new in package $10 shippedSold

3. Octura 1938 Raw new in package $10 shipped

4. Octura X632 Balanced sharpened $10 shippedSOLD pending payment

5. Prather 215 needs balancing $10 shipped

6. Grim Racer 40x52 balanced sharp $10 shippedSold

Thanks for looking! Will consider offers for multiple items purchased.

-Wayne

ALSO LIPOS!!!! These are POLY RC lipos new never used never soldered a connection on any!

1. Qty of 4 25C 3300mah 2s1p 7.4v $35 EACH shipped Sold pending payment

2. One 20C 3700mah 2s1p 7.4v $40 shippedSold

[OJ racer]

Do you have a picture of the kb45?

[FE Wannabe]

Wayne,
You have a PM on the 200A ESC.

[goldendesign04]

sorry FE_wannabe its been spoken for, pending payment

also guys the voltage checker is for lipos an tell the voltage in each cell (duh)
anything packaged together youd want just the seperate bits...pm me Im open to offers all around!

[SJFE]

I call the KB PM on the way

[driftrr]

I'll take the etti esc!

[txboatpilot]

Paypal sent for 200A esc and 3X 5.5mm bullet connectors...

Thank you sir,

Rich

[Doby]

Payment sent for the Balancer

[yz120]

what type of motorcycle racing do you do? class! bike etc.
i race motocross in the 40+ exp. class. 05 rm250

the pic in my avitar is my 05 yz250 that just sits on the stand,way to nice to beat up,i will keep it forever as it`s my fave.
used to race 4strokes but have way more fun on the 2stroke.

[smm_cbf]

just wondering, but isn't the rigger a highly modded NQD arrow wind?

[SJFE]

No the nqd is a cheap knock off of this hull.

[dirtysouth31]

the nqd is a knock off of the graupner silver bullet

[dirtysouth31]

lol,u beat me too it sjfe

[Mich. Maniac]

what he said!

[goldendesign04]

thanks for keeping the information true fellas! Your right the nqd is a poor representation (i was able to see mine side by side) with the right motor/esc setup youll definetly have a fast and stable setup. Both hulls for that matter.

-Wayne