MHZ Mystic C5000 1140cm, Leopard motors, Swordfish Esc, Carbon, etc

[cyprus31]

Guys
up for sale is my latest project just finished.

My beauty MHZ Mystic 1140cm Carbon Kevlar fully loaded with the following additions:

a) 2 x Leopard 4082 - 2200kv motors together with cooling jackets
b) 2 x Leopard 200A Esc fitted with 4mm Spark Eliminator and extra ETTI capasitors from OSE and fully covered with liquid electrical tape for waterproofing
c) Custom made carbon mounts for rudder servo and esc as see in pics
d) 4 x 3s Turnigy nano-tech 5000mah 3S 45~90C Lipo Pac (run as 2 x 6s)
e) Another set of 4 x3s Lipos (run as 2 x 6s)
f) Spare prop shaft fitted with flex shaft
g) X442 L/R props
h) Carbon battery mounts
i) Custom made cover blue colour
Will also include whatever bits and pieces I have of this projet. All batteries and esc are fitted with male/female 5.5mm bullet plugs

The boat is proffessionally painted (paid a lot) white (paint code of Mercedes) and after applying the JBS Scheme it was also painted with clear coat to protect the stickers.

I am willing to ship it worldwide if buyer pays the requested shipping cost.

Final price is EURO 2100.- plus another Euro 100.- for EMS/Datapost (max 1 week) courier shipping.

Would accept only paypal to the following: [email protected]

IMG_0836.jpgIMG_0837.jpgIMG_0839.jpgIMG_0840.jpgIMG_0834.jpg

[Pwb201]

Pm sent

[nata2run]

Nick, so sad to see this go. Good luck I'm sure this will go soon.

[Skullcracken]

Do you have a liner on the hatch to keep water out and not need taping? How much total shipped to US in US dollars?

[woodster]

Looks like $2900 US dollars shipped. Sweet boat

[Pwb201]

Hey hold your horses I've got first dibs..

[cyprus31]

Do you have a liner on the hatch to keep water out and not need taping? How much total shipped to US in US dollars?

I used to have a liner there but kept coming off. Maybe over in Usa you may find better liner products for this job. Of course even if you have a liner , tape on top is also a must. You wouldnt want to waist this expensive project for just a pice of tape.

Total shipped in USDollars is 2900.-

[Skullcracken]

It just looked to be a tough hatch to tape because of the location of the latches on the hatch.

[cyprus31]

It just looked to be a tough hatch to tape because of the location of the latches on the hatch.

No it can be taped very easy

[cyprus31]

Any more offers here?

[BW won]

Beautiful boat cyprus31! Out of curiosity, how much money do you have invested into this boat(minus design, labor, and paint)? Also, do you have any information in regards to its performance?

[cyprus31]

Beautiful boat cyprus31! Out of curiosity, how much money do you have invested into this boat(minus design, labor, and paint)? Also, do you have any information in regards to its performance?

I have invested more than the asking price. This is without any labour and paint cost. If I would calculate also the labour this would double the price. The boat is only 2 months old and tried it a few times with the included x442 props and the max speed was 109.50 klm. I have also a pending order of alum x445 which I will try upon arrival.

[nata2run]

To you guys out there looking at this Hull....its a fantastic hull with lots of potential (I have the same boat) capable of over 100mph - the setup Cyprus is offering should get close to 85-95mph if you invest a bit of time to tweek and x447 props. There are 3 new build threads on this forum regarding this hull. This boat is worth every penny. Nick, I wouldn't let go of mine that cheap! but....what can I say.

[cyprus31]

Thanks Kent for your kind words.
I know how much I invested and beleive me the price asking is much below of what I have paid. If I calculate the paint shop money and my labour cost this should double the price listed.
But never mind. You know the reasons. Lets see who will the lucky guy buying it.

[rcbidder]

If you part out, I would be interested in the Hull, Hardware, CF Battery mounts and spare flex shafts.
Do NOT NEED the motors, esc, lipos, servo and props.
LMK.