Tweet
Clearing out some hardware. Some new, some used. All is usable in good shape- I wont sell junk (junk goes in the trash).
Speedmaster Strut $30 shipped. SPDSD-2140. I pulled this off a hull I bought. Im going with 1/4" so I have no use for this. Looks like new! Bushing is nice fit. This is high quality hardware!
Motor Mount $10 shipped? 5" rails, Pilot hole is 40.33mm, bolt circle is 25mm, 4mm holes. Large hole thru center is 19mm.
3/16" .078 wire drive $20 by Octura/Myself/Wohlt. Octura prop shaft, I glued it in with Loctite 648, Octura drive dog & nut. 1 washer. Wohlt set screw coupler- 5mm X .078 wire. Set is new and unused- selling as set only!
5mm X .062 Coupler by Wohlt $10 never used.
3/16" w/ .150 cable $15 (sold). New, drive dog is pined in place. Appears to be silver soldered in. Good quality! Comes with teflon as shown. Was told this might be Hughey?
I will ship outside the US at buyers expense. I will also take offers.
Trades welcomed : 1/4 Speedmaster stinger, 1/4" prop shaft/1/4" flex, 1/4" prop shaft stepped to 3/16" w/1/4" cable, Fightercat 5692 4" rail motor mount, 5692 100kv motor, big ass ESC for aforementioned motor! I have cash for larger items as well
3/16" w/.150:
Speedmaster Strut $30 shipped. SPDSD-2140. I pulled this off a hull I bought. Im going with 1/4" so I have no use for this. Looks like new! Bushing is nice fit. This is high quality hardware!
Motor Mount $10 shipped? 5" rails, Pilot hole is 40.33mm, bolt circle is 25mm, 4mm holes. Large hole thru center is 19mm.
3/16" .078 wire drive $20 by Octura/Myself/Wohlt. Octura prop shaft, I glued it in with Loctite 648, Octura drive dog & nut. 1 washer. Wohlt set screw coupler- 5mm X .078 wire. Set is new and unused- selling as set only!
5mm X .062 Coupler by Wohlt $10 never used.
3/16" w/ .150 cable $15 (sold). New, drive dog is pined in place. Appears to be silver soldered in. Good quality! Comes with teflon as shown. Was told this might be Hughey?
I will ship outside the US at buyers expense. I will also take offers.
Trades welcomed : 1/4 Speedmaster stinger, 1/4" prop shaft/1/4" flex, 1/4" prop shaft stepped to 3/16" w/1/4" cable, Fightercat 5692 4" rail motor mount, 5692 100kv motor, big ass ESC for aforementioned motor! I have cash for larger items as well
3/16" w/.150:
: 
Comment