2 Castle/NEU 1717 1500kv

[Brushless55]

To the top

[tryinotocrash]

Can you tell me what the voltage limit is and the wind of these motors. I have a Venom Segad project in the future, any thoughts on these for that??

[Brushless55]

Can you tell me what the voltage limit is and the wind of these motors. I have a Venom Segad project in the future, any thoughts on these for that??

I believe these are Y wind motors and can take upto 8s form what I understand

[Chrisg81983]

brushless i mean this with no disrespect, but i would check on that 8s to whom who have done it i have a few of these and stay at 6 cell 7 the most the bearings are rated for 45,000 rpm's so with 8 you are at / over the limit especially when the motor unloads
i know you had a bunch of these motors i am curious did u ever run 8s if so how did it work
these motors are amazing on 6s with a 450 three blade thats what i run in my twin 1717 setup

[Brushless55]

brushless i mean this with no disrespect, but i would check on that 8s to whom who have done it i have a few of these and stay at 6 cell 7 the most the bearings are rated for 45,000 rpm's so with 8 you are at / over the limit especially when the motor unloads
i know you had a bunch of these motors i am curious did u ever run 8s if so how did it work
these motors are amazing on 6s with a 450 three blade thats what i run in my twin 1717 setup

I've seen these run 8s
and a 450??
these are 600 motors and will not fit a 450 heli..
my Trex600 needs a frame mod to make one fit
here is a 600E flying a 1717 on 6s
http://www.youtube.com/watch?feature...v=_gbEXm2i8A0#!

[Chrisg81983]

I ment a octura 450 / 3 propeller sorry about that I know these motors are kick a$$ but I never ran on 8s

[srislash]

I've seen these run 8s
and a 450??
these are 600 motors and will not fit a 450 heli..
my Trex600 needs a frame mod to make one fit
here is a 600E flying a 1717 on 6s
http://www.youtube.com/watch?feature...v=_gbEXm2i8A0#!

That is some flying!!!

[Chrisg81983]

That is some good flying by the way brushless is that u flying

[Brushless55]

no not me flying..
found that video when I was looking for some 1717 helis

[tryinotocrash]

Chris G Yes that is the limit on the 1717 1y I run now it maxes at 25 volts. That is why I was wondering.

[Brushless55]

And these 1717 motors will take 8s in the proper application
6s is under rated from Castle
Thanks!

[tryinotocrash]

Not to be a pain but any idea on the diam. Of these motors ? I am trying to mek a decision on them. :)

[Brushless55]

Not to be a pain but any idea on the diam. Of these motors ? I am trying to mek a decision on them. :)

without fins 46mm
with fins 49.5mm
lenght 80mm

[jerryk]

I'll take one, send me your paypal info. Thank you

[hazegry]

pm sent on possible trade for the last one