Looking for various hardware for hydro build

[flyboy320]

Taking the plunge and trying my hat at my first hydro build. I am going to be using Fuller's hardware (these particular parts were recommended by the designer), but thought I would post here to try and save some bucks first. :)

Let me know if you are willing to part with any of the following;

1. Fullers 1" super strut bracket http://www.drcwebservices.com/ffe/im...acket1inch.jpg

2. 12 - 32 cell super strut - 1 7/8" length strut for .150 cable http://www.drcwebservices.com/ffe/im...andbracket.gif

3. Fuller's aluminum skid fin http://www.drcwebservices.com/ffe/images/fpnewfin.jpg

4. Fuller's 3.5" rudder http://www.drcwebservices.com/ffe/images/newrudder1.jpg

5. Hughey .150 x 3/16ths flex shaft & .150 teflon tube

[Diegoboy]

would that be for the Vac-U-Pickle?

[flyboy320]

would that be for the Vac-U-Pickle?

You betcha...

Was thinking of the Solinger hardware, but Doug Smock recommended using separate parts (like the ones from Fuller's) for ease of positioning them on the transom.