Tweet
You guy’s know what this is so I need no go into detail. I have replaced the broken drive bracket, read ajusted the drive tubes, added longer silicon tubing to the end’s of said drive tubes and cleaned up the hull. The drive tubes have been repacked with prather cable lube & shrink has been reapplied to the lowe rends. The esc’s power leads need to be tapped for powering the included bec unit. Everything’s tested and working perfectly. The custom threaded 4mm to .130 cable prop shafts are being shipped tomorrow. This will allow a huge variety of prop selection. They will be included. I have well over 350 invested in this setup. I will part it out but don’t wait long. It wont last 4 hours on ebay.
Option 1
Hull & Hardware:
Includes:
Hi torque cirus servo.
Hull of course…lol
Ubec unit
50 bucks worth of Carbon Kevlar & CF plate installed.
Dubro extended steering rod with captured ends.
Aluminum sleeved Proboat drives with cut down SpeedMaster bushings.
Custom threaded 4mm to .130 cable prop shafts.
Narrowed down Custom milled 1/8th to .130 straight couplers.
Custom single canopy hatch
Twin through hull 4mm water pickups
Twin Prather stainless output bulkhead fittings.
Proboat Cat stand.
Custom motor mount capable of 380 to 550 or 28mm to 36mm motors. It is ridged enough to Easley handle L to XL motors. Carbon fiber
380 adaptor included.
Considered labor and the cost of supplies I will take 180 shipped for option 1.
Option 2
Everything from O-1 including
2 Feigao 380XL 3180kv motors
2 HiModel 70amp 7s Esc’s Both water proofed & cooled with
5.5 battery couplers & 3.5s on the motor end.
I will break these up if the whole package don’t move tonight.
I am looking for 280. shipped for the package
If & when I break it up I need 40 per motor & esc.
Payment via paypal only. Shipping via UPS ground with tracking.
The package ships one business day from receipt of payment.
Option 1
Hull & Hardware:
Includes:
Hi torque cirus servo.
Hull of course…lol
Ubec unit
50 bucks worth of Carbon Kevlar & CF plate installed.
Dubro extended steering rod with captured ends.
Aluminum sleeved Proboat drives with cut down SpeedMaster bushings.
Custom threaded 4mm to .130 cable prop shafts.
Narrowed down Custom milled 1/8th to .130 straight couplers.
Custom single canopy hatch
Twin through hull 4mm water pickups
Twin Prather stainless output bulkhead fittings.
Proboat Cat stand.
Custom motor mount capable of 380 to 550 or 28mm to 36mm motors. It is ridged enough to Easley handle L to XL motors. Carbon fiber
380 adaptor included.
Considered labor and the cost of supplies I will take 180 shipped for option 1.
Option 2
Everything from O-1 including
2 Feigao 380XL 3180kv motors
2 HiModel 70amp 7s Esc’s Both water proofed & cooled with
5.5 battery couplers & 3.5s on the motor end.
I will break these up if the whole package don’t move tonight.
I am looking for 280. shipped for the package
If & when I break it up I need 40 per motor & esc.
Payment via paypal only. Shipping via UPS ground with tracking.
The package ships one business day from receipt of payment.
Comment