Tweet
Just add radio gear and batteries.
Includes:
-Etti motor mount
-PB 1500KV motor with cooler
-3/16 stuffing tube without liner
-.150 cable drive with Octura prop shaft and drive dog
-PB motor coupler
-Turnigy 60A ESC which has been Plastic Dipped on the ends to prevent water damage
-Turnigy BEC
-Traxxas 2075 Servo
-Speedmaster strut
-1 layer of kevlar laid inside
-RECEIVER NOT INCLUDED-
The paint has lifted off some of the corners from the tape but I cleared over it to help protect it.
Video of boat running around with X445 on a single 4S 20C 5000mah pack. Gets almost 10 minutes of run time with this power combination.
Asking $old!!! shipped to the lower 48 via USPS Parcel Post with confirmation. PP fees included. Boat stand included with asking price. Boat will be shipped in original box.
-Or $110 for hull and hardware.
-$25 for perfectly working ESC
-$40 for perfectly working PB 1500kv motor with cooling sleeve.
Includes:
-Etti motor mount
-PB 1500KV motor with cooler
-3/16 stuffing tube without liner
-.150 cable drive with Octura prop shaft and drive dog
-PB motor coupler
-Turnigy 60A ESC which has been Plastic Dipped on the ends to prevent water damage
-Turnigy BEC
-Traxxas 2075 Servo
-Speedmaster strut
-1 layer of kevlar laid inside
-RECEIVER NOT INCLUDED-
The paint has lifted off some of the corners from the tape but I cleared over it to help protect it.
Video of boat running around with X445 on a single 4S 20C 5000mah pack. Gets almost 10 minutes of run time with this power combination.
Asking $old!!! shipped to the lower 48 via USPS Parcel Post with confirmation. PP fees included. Boat stand included with asking price. Boat will be shipped in original box.
-Or $110 for hull and hardware.
-$25 for perfectly working ESC
-$40 for perfectly working PB 1500kv motor with cooling sleeve.
Comment