Aeromarine Scorpion mono hull/hardware

[Jesse J]

OK, lets try this again. ----------------- IT WORKED!! SOLLLLLLLLLLLLLLLLLLLD

JUST HULL for $60 shipped ContUS. boat has not been run and is in exactly same condition.
The flood chamber remains and holes are drilled for speedmaster hardware.

I can provide more pictures if there is interest. Again, no hardware nor servo is part of this deal.

I got the bare hull with the strakes removed (by Remy at Aeromarine) and did the bondo work myself (never liked the shoebox appearance). The hull is extremely true (I had it set up for Q mono and it was in the upper 50s/lower 60s and super stable). I also manufactured myself the cowl - construction foam with heavy glass cloth and epoxy. Paint on deck and hatch is coated with metal flake Duplicolor automotive clear. Hatch attaches with CF rods in hull that enter bondo-reinforced holes in hatch and (needs) turn buckles at rear.

I also installed a flooded stuffing tube to allow for up to 1/2" adjustment of the strut. I have made a subhatch that can be included if buyer desires.
(boat is for sale on other sites)

scorp2.jpgscorp1.jpgscorp3.jpgscorp4.jpgscorp5.jpg

[Jesse J]

Price drop to $325!

[Jesse J]

this would make a great saw boat or Q mono contender!
make an offer!

[Jesse J]

OK, dropped price again - now you are looking at less than $300 to have it at your door!

Again, make an offer if you are interested.

[Jesse J]

Well, how about $250! Now it's gettIng good!

[Jesse J]

OK, lets try this again.

JUST HULL for $60 shipped ContUS. boat has not been run and is in exactly same condition.
The flood chamber remains and holes are drilled for speedmaster hardware.

I can provide more pictures if there is interest

[jevmax]

Surprised that nobody has snapped this one up yet!

[MAMBA2200]

so theres no hardware for 60 ????? how much with hardware?????

[madmikepags]

This hull was mine, I had an idea to take the strakes out of the scorpion because it had so much lift, Remy custom made this for me but I never got around to building it and sold it to jesse here. He finished it and when it was done he sent me a couple of videos, I was very impressed with it's performance. Someone will have a very good boat here.

[Jesse J]

so theres no hardware for 60 ????? how much with hardware?????

I can see what I have for hardware if someone is interested, it would probably double the bare hull price depending on what I can find in my stashes.
I can add a twice used Leo 4092 ~1700 kv with cooler for another 70.
I'm at work but can add photos of mentioned item this evening.

[Jesse J]

Thanks Mike! I too was impressed how the de-straked hull performed at 60+ mph.

[nitronuts]

since no one said ill take it yet /// ill take the hull with cowl for 60.00 if still available pm me payment details

[madmikepags]

hey nitronuts check ur PM

[Jesse J]

sold to Nitronuts.

[nitronuts]

paypal sent