FS Neu 1515 Motors

[m4a1usr]

Folks,

I am getting rid of some spare motors that I have laying around. These are perfectly working units. They have 5.5mm bullets on them. I can take them off if you want. Shafts are cut down to use Octura couplers. The motor on the left is a 1515/1Y 2200kv, while the motor on the right is a 1515/0.5Y 4400kv. The 1515/0.5Y has 2 of the 4 screws threaded to 4-40. I didnt do it. Bought it that way. I want $150 for each one and will offer the buyer(s) an HRC alum jacket for an additional $10 if you want it. Shipping is extra, but a priority box is only $9 anywhere to the lower 48. International shipping is going to be more. Excellent race quality motors for no where near New Neu retail. Thanks for looking!

The Neu 1515/4400kv/0.5Y has been sold!

John

[tagasagwan]

Oh Man! wish you posted these earlier John! I just grabbed one used 1515 2200kv castle/neu here at OSE a few days ago and another one bnew locally! Well, good luck with the sale! This is a great deal you're offering! Grab these guys! John's a great seller!

[HOTWATER]

How many runs on these motors and what were the boats AND systems they were run with....temps?

[m4a1usr]

How many runs on these motors and what were the boats AND systems they were run with....temps?

The 2200kv was in my UL-1 for a couple runs to compare against a Leopard and a CC/Neu. So it has only 10 or 15 minutes in one of my boats. The 4400kv never was used in any of my setups. That motor was purchased for my 34" Fullers rigger that at the time had a 1515/0.5y in it. I decided to stick with 4S CC/Neu motors for both hulls. I purchased both motors as backups for motors I already had on hand. Now since I am not using either of these type motors theres no sense on having 2 "extra" motors in the spares box.

[Xzessperated]

Sir, you have a PM :)

[Xzessperated]

John, you have funds and a PM.
Thanks very much.
Paddy

[HOTWATER]

Paddy, which motor did you get...just curious...

Kent

[Xzessperated]

Paddy, which motor did you get...just curious...

Kent

Sorry Kent, I should have said that. It was the 1515 0.5Y

[HOTWATER]

No worries bro! Good luck with it!!

-Kent

[HOTWATER]

PM sent on the other motor.....

[Xzessperated]

John the 1515 0.5Y motor arrived in good condition this morning. It was as you described and no one could have packaged it better than you did.
Thanks very much for the good deal and the care you took to get it to me in the same condition as it left you.
Paddy

[m4a1usr]

John the 1515 0.5Y motor arrived in good condition this morning. It was as you described and no one could have packaged it better than you did.
Thanks very much for the good deal and the care you took to get it to me in the same condition as it left you.
Paddy

Wow, that got there kinda fast. Thank you Paddy. Neu 1515/1Y still available

John