Tweet
HI ALL,
I HAVE A TOP SECRET BOATS SUPERCAT TWIN 43 UP FOR SALE..THE BOAT HAS VERY LITTLE USE ON ALL COMPONENTS I WOULD SAY 5 RUNS AND HAS NEVER BEEN DUNKED OR FLIPPED..NEVER HAD A CHANCE TO GET IT REALLY DIALED BUT I WAS GETTING SOME IMPRESSIVE SPEED INTO THE LOW 70'S ON 10S2P 10000 MAH NANOTECHS 45-90C ON A FEW SHORT SPEED RUNS..(IMPRESSIVE FOR A FULLY LOADED BOAT AT 22LBS!)I WOULD RECOMMEND RUNNING 9S2P WITH THE CURRENT PROPS I AM OFFERING TO KEEP HEAT UNDER CONTROL FOR THE MOTORS.I HAVE NOT SEEN ANY ELECTRIC POWERED ONES AROUND BUT WITH SOME MORE DRIVING TIME AND TINKERING SOMONE COULD MAKE THIS AN OUTSTANDING RUNNER..AS ILLUSTRATED IN THE PICTURES THE BOAT HAS GELCOAT CRACKS ON BOTH SIDES OF THE HULL UNDER THE WATERLINE FROM MY MOTOR MOUNTS BEING TOO SNUG AND PUSHING AGAINST THE INSIDE OF THE HULL..THIS HAPPENED OVER A PERIOD OF TIME AND I DID NOT NOTICE IT UNTIL HALFWAY THROUGH THE BUILD..COSMETIC ONLY AND IS REPAIRABLE BUT NOT HIGHLY NOTICABLE..I AM SELLING THIS BOAT WITHOUT SPEED CONTROLLERS..BUT HERE IS WHAT IS INCLUDED
HULL AND HATCH OF COURSE 11.5 POUNDS EMPTY!!
SCORPION HK4035'S 800KV X2
WILLIAMS RACING CUSTOM WATER COOLED MOTOR MOUNTS FIBERGLASSED IN
1/4 LEFT AND RIGHT LAY DRIVE CABLES AND 8MM COLLETS
TOP SECRET BOATS RUDDER WITH 2 WATER PICKUPS
CHINA 1/4 ADJUSTABLE STINGER DRIVES (PERFECT FOR THE TRANSOM OVERHANG ON THIS HULL)
HITEC 7955TG SERVO AND AEROMARINE MOUNT/440 LINKAGE TO RUDDER
AEROMARINE LINKAGE/RUDDER SEAL WITH ORING/MISC WATER COOLING HOSE/WATER INLETS AND OUTLETS
ABC 58MM BY 1.8 PITCH PROPS DONE BY "EGNEG" HERE ON OSE UNREAL JOB ON THESE PROPS
ASKING PRICE IS $950.00 SHIPPED TO CONTINETAL USA ONLY VIA USPS OR A CHEAPER METHOD IF FOUND...
PLEASE PM OR ASK ME ANY QUESTIONS OR CONCERNS YOU MAY HAVE AND I WILL BE HAPPY TO HELP
THANKS FOR LOOKING
BUILD THREAD WITH MORE PICS
http://forums.offshoreelectrics.com/...cat&highlight=
VIDEO
http://forums.offshoreelectrics.com/...-43&highlight=
I HAVE A TOP SECRET BOATS SUPERCAT TWIN 43 UP FOR SALE..THE BOAT HAS VERY LITTLE USE ON ALL COMPONENTS I WOULD SAY 5 RUNS AND HAS NEVER BEEN DUNKED OR FLIPPED..NEVER HAD A CHANCE TO GET IT REALLY DIALED BUT I WAS GETTING SOME IMPRESSIVE SPEED INTO THE LOW 70'S ON 10S2P 10000 MAH NANOTECHS 45-90C ON A FEW SHORT SPEED RUNS..(IMPRESSIVE FOR A FULLY LOADED BOAT AT 22LBS!)I WOULD RECOMMEND RUNNING 9S2P WITH THE CURRENT PROPS I AM OFFERING TO KEEP HEAT UNDER CONTROL FOR THE MOTORS.I HAVE NOT SEEN ANY ELECTRIC POWERED ONES AROUND BUT WITH SOME MORE DRIVING TIME AND TINKERING SOMONE COULD MAKE THIS AN OUTSTANDING RUNNER..AS ILLUSTRATED IN THE PICTURES THE BOAT HAS GELCOAT CRACKS ON BOTH SIDES OF THE HULL UNDER THE WATERLINE FROM MY MOTOR MOUNTS BEING TOO SNUG AND PUSHING AGAINST THE INSIDE OF THE HULL..THIS HAPPENED OVER A PERIOD OF TIME AND I DID NOT NOTICE IT UNTIL HALFWAY THROUGH THE BUILD..COSMETIC ONLY AND IS REPAIRABLE BUT NOT HIGHLY NOTICABLE..I AM SELLING THIS BOAT WITHOUT SPEED CONTROLLERS..BUT HERE IS WHAT IS INCLUDED
HULL AND HATCH OF COURSE 11.5 POUNDS EMPTY!!
SCORPION HK4035'S 800KV X2
WILLIAMS RACING CUSTOM WATER COOLED MOTOR MOUNTS FIBERGLASSED IN
1/4 LEFT AND RIGHT LAY DRIVE CABLES AND 8MM COLLETS
TOP SECRET BOATS RUDDER WITH 2 WATER PICKUPS
CHINA 1/4 ADJUSTABLE STINGER DRIVES (PERFECT FOR THE TRANSOM OVERHANG ON THIS HULL)
HITEC 7955TG SERVO AND AEROMARINE MOUNT/440 LINKAGE TO RUDDER
AEROMARINE LINKAGE/RUDDER SEAL WITH ORING/MISC WATER COOLING HOSE/WATER INLETS AND OUTLETS
ABC 58MM BY 1.8 PITCH PROPS DONE BY "EGNEG" HERE ON OSE UNREAL JOB ON THESE PROPS
ASKING PRICE IS $950.00 SHIPPED TO CONTINETAL USA ONLY VIA USPS OR A CHEAPER METHOD IF FOUND...
PLEASE PM OR ASK ME ANY QUESTIONS OR CONCERNS YOU MAY HAVE AND I WILL BE HAPPY TO HELP
THANKS FOR LOOKING
BUILD THREAD WITH MORE PICS
http://forums.offshoreelectrics.com/...cat&highlight=
VIDEO
http://forums.offshoreelectrics.com/...-43&highlight=
Comment