Taken off market... Can't bear to sell and my wife even says to keep it.
This is a hull I have drooled over for years... I just don't have the battery cash to race her!
$850 shipped, add $175 for additional props - international pays extra shipping.
requires 180+ amp HV esc, batteries and radio
Hull (45" x 12.5"): I bought this new from Aeromarine this summer and raced in the Dallas club races - but she hooked hard in the turns. I then spent a day sanding, bondoing, sanding, bondoing and WOW what a difference! As Jay Turner says, " that's a different boat!" She did have a wipe out on her first run after the blue printing and lifted a small portion of the bow decking, which was repaired and is holding strong.
All speed master hardware, wet well stuffing tube and JW racing motor mount - all assembled by me with new parts. Drive line is .25" and drive dog is mounted on the .25" part before the stepdown to 3/16" prop shaft. Super servo with CF reinforced rudder rod - won't bend any more!!
Castle 2028 I bought new from OSE in July. I had run one of the new Castle HV ESCs, but after a couple runs I had to send back for the recall. Since I was running a Castle 180 HV, which I evidently didn't take care to dry enough when dunked in another boat....
She runs in the low 60s on 10S2P spinning an Octura x460 and the present Prather 255. I have other props that can be combined into this sale, X457, X462, X455/3 balanced and sharpened by DasBoata, and one X460 raw prop.
IMG_9782.jpgIMG_9786.jpgIMG_9787.jpgIMG_9789.jpgIMG_9790.jpg
This is a hull I have drooled over for years... I just don't have the battery cash to race her!
$850 shipped, add $175 for additional props - international pays extra shipping.
requires 180+ amp HV esc, batteries and radio
Hull (45" x 12.5"): I bought this new from Aeromarine this summer and raced in the Dallas club races - but she hooked hard in the turns. I then spent a day sanding, bondoing, sanding, bondoing and WOW what a difference! As Jay Turner says, " that's a different boat!" She did have a wipe out on her first run after the blue printing and lifted a small portion of the bow decking, which was repaired and is holding strong.
All speed master hardware, wet well stuffing tube and JW racing motor mount - all assembled by me with new parts. Drive line is .25" and drive dog is mounted on the .25" part before the stepdown to 3/16" prop shaft. Super servo with CF reinforced rudder rod - won't bend any more!!
Castle 2028 I bought new from OSE in July. I had run one of the new Castle HV ESCs, but after a couple runs I had to send back for the recall. Since I was running a Castle 180 HV, which I evidently didn't take care to dry enough when dunked in another boat....
She runs in the low 60s on 10S2P spinning an Octura x460 and the present Prather 255. I have other props that can be combined into this sale, X457, X462, X455/3 balanced and sharpened by DasBoata, and one X460 raw prop.
IMG_9782.jpgIMG_9786.jpgIMG_9787.jpgIMG_9789.jpgIMG_9790.jpg
Comment