Scorpion 4020 and 4035 for sale

[sigelitest]

selling my scorpion motors they won't work in my projects and need some thing else
on the 4035 800kv i would like 120.00 Sold&shipped
on the 4020 1390kv i would like 80.00

i will pay shipping in us
add 10.00 for canada
IMG-20111219-00136.jpgIMG-20111219-00135.jpgIMG-20111219-00140.jpgIMG-20111219-00137.jpgIMG-20111219-00138.jpg

4020
Stator Diameter 40 mm(1.56 in)
Stator Thickness 20 mm(0.79 in)
No. of Stator Arms 12
Magnet Poles 8
Motor Wind 6 Turn Delta
Motor Wire 28-Strand 0.29mm
Motor Kv 1390KV RPM/Volt
No-Load Current (IO/10v) 3.45 Amps
Motor Resistance (RM) 0.007 Ohms
Max Continuous Current 90 Amps
Max Continuous Power 1890 Watts
Weight 284 Grams (10.02 oz)
Outside Diameter 48.9 mm (1.9 in)
Shaft Diameter 4.98 mm (0.19 in)
Body Length 46.5mm (1.81 in)
Overall Shaft Length 78.7 mm (3.10 in)
Max Lipo Cell 6s
Motor Timing 5deg
Drive Frequency 8kHz

4035
Stator Diameter 40 mm (1.56 in)
Stator Thickness 35 mm (1.024 in)
No. of Stator Arms 12
Magnet Poles 8
Motor Wind 6 Turn Delta
Motor Wire 27 - Strand 0.29mm
Motor Kv 800KV RPM / Volt
No-Load Current (IO) 2.5 Amps @ 8.4v
Motor Resistance (RM) 0.010 Ohms
Max Continuous Current 100 Amps
Max Continuous Power 4200 Watts
Weight 435 Grams (15.34 oz)
Outside Diameter 48.9 mm (1.9 in)
Shaft Diameter 7.98 mm (0.30 in)
Body Length 61.5 mm (2.38 in)
Overall Shaft Length 94.7 mm (3.73 in)
Max Lipo Cell 12s
Motor Timing 5deg
Drive Frequency 8kHz

[sigelitest]

IMG-20111219-00143.jpgIMG-20111219-00141.jpgIMG-20111219-00142.jpg
More pics
if u get both i will knock 10.00 off since it will be easier to ship.

this is from their website
motor magnets are custom manufactured to be able to withstand high temperatures. The wire we use to wind the stators is rated to 180 degrees C (356 F), so it can take the heat and keep on performing. This all adds up to a motor that can provide you the power you need, without going up in a cloud of smoke if you push it a little too hard

[sigelitest]

these motors have been mounted and tested but not put in a hull.
i will also look at trades the 4035 would be wild in a 33" hull on 10s

[sigelitest]

....

[scottw]

Mike

Sent PM

Scott

[sigelitest]

scott i am holding the 800kv motor waiting on a reply

[Agitator]

I would like the 4035 at your asking price if you get no offers.

Mike

[sigelitest]

Scott said he would PP me in a few hours at about 1:00 my time I will give him 2 more hours. If it don't go through it is yours.i need to send it in the am because i am going out of town. and I can't get the wife to mail my stuff for me

do u want the 4020 i will give u a real good deal on it

[scottw]

Mike

let this one go to Agitator
will unfortunatly have to pass on this one

scott

[Agitator]

Thanks Scott. I am only interested in the 4035 though, PM your PP info to me and will get payment sent in the AM.

Mike

[sigelitest]

the 4035 is packed and ready to go waiting on payment.

if anyone wants the 4020 i will let it go for 60.00 + shipping

[Agitator]

Payment sent for 4035/800

Thanks, Mike

[sigelitest]

I got it thanks please PM me your address i want to send it this morning

[sigelitest]

ok still have the 4020 for sale> anyone want to make an offer?