turnigy marine 120 upgraded caps and wire 3060 motor and water jacket

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tarnold69
    Senior Member
    • Mar 2011
    • 133

    #1

    turnigy marine 120 upgraded caps and wire 3060 motor and water jacket

    turnigy marine 120 wire upgraded to 10 gage and caps upgrades to 2 rubycon ulh 105c 35v 1000uf x2 so you have 2000 uf 0f starage with these upgrades it out performed my castle 120 i also have a intigy 3060 inrunner with water jacket bothe were run on 2 cell on a recovery craft i built both very little run time they only were ran when i needed to recover a boat so very little 45$ for the esc and 35$ for the motor with water jacket [PRICES ARE FIRM] PRICES ARE SHIPPED I ONLY TAKE PAYPAL IF YOU WANT BOTH I WILL SELL FOR 75$ FOR THE PAIR [I DO NOT SHIP OUT OF THE COUNTRY DONT EVEN ASK ITS NOT AN OPTION] SHIPPING IS TO THE LOWER 48 ONLY all sold to lenny thanks
    Attached Files
    Last edited by tarnold69; 10-04-2011, 12:03 AM. Reason: all sold to lenny thanks
  • lenny
    Fast Electric Addict!
    • Sep 2010
    • 4294

    #2
    I will take them, pending more info thanks.
    ? ONLY IF THEY WORK

    My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

    Comment

    • sundog
      Platinum Card Member
      • Feb 2009
      • 878

      #3
      Dang Lenny, you must be eating in front of your computer. Woops, I see you had plenty of time for this one! Fast buys, good deals.
      Legend 36 sailboat, KMB Powerjet Ed Hardy Viper, ABC jet pwrd BBY Oval Master, ABC Hobby Jetski, NQD Tear Into's, HK Discovery 500, MickieBeez pwrd Jet Rigger!, Davette/Gravtix jet sprint, KMB Powerjet Pursuit, NQD pwrd Jet Catamaran!,Steam pwrd African Queen, Sidewinder airboat, Graupner Eco Power

      Comment

      • tarnold69
        Senior Member
        • Mar 2011
        • 133

        #4
        everything left

        i have this mean machine hull carbon fiber and kevlar lined with west marine resin used the west system the same with the gel coat but when i put the second coat on it was not drying as fast as i wanted so i zapped it big mistake it crystalized it looks like shiz so it will need a little sanding and throw some white paint on it the good thing is it will still be gelcoated the hull id solid it is the auro marine mean machine ,also the drive system you see on the junky recovery craft it is vertually new used a few times like the motor and esc it is the standard drive rudder and drive ose has it on there first page of drive systems for around 80$ you get cable drive dog coupler for the cable to motor and i believe it has a 1.4 pitch 45mm onit as well i will pullit all off the junk craft and send it a generic but new servo works well and the 2 bats used to be 3 cel i lost a cell in bothe they have been coverted to 2 cell the balance plug has been changed so charge up as 2 cell basically with the motor and esc you are buying the rst of what you need to complete the boat minus radio and receiver to run it on 4 cell this is a great hull it just needs sanded down and some paint thrown on it any way i will do all for 200$ shipped i already shipped your other stuff you should have thursday you can track at www.usp.com orcall 1-800-742-5877 tracking # 1z340x090353506665 this is everything i have left if i stmble across anything else it will be thrown in the box the box coming to you you will need a x room for all of it it was 40 pounds this message is for lenny
        Attached Files
        Last edited by tarnold69; 10-03-2011, 03:23 PM.

        Comment

        • lenny
          Fast Electric Addict!
          • Sep 2010
          • 4294

          #5
          Ok sold with more info please.
          ? ONLY IF THEY WORK

          My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

          Comment

          • tarnold69
            Senior Member
            • Mar 2011
            • 133

            #6
            all sold to lenny thanks

            Comment

            Working...