Upgraded impulse 31

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RIPFENCE
    Fast Electric Addict!
    • Sep 2009
    • 1332

    #1

    Upgraded impulse 31

    [ATTACH=CONFIG]61133[/ATTACH][ATTACH=CONFIG]61132[/ATTACH][ATTACH=CONFIG]61131[/ATTACH][ATTACH=CONFIG]61130[/ATTACH][ATTACH=CONFIG]61129[/ATTACH]hi all,

    have a proboat impulse 31 up for sale..spent a little time speed chasing and it crashed several times as shown by the hatch and the cracks in the paint on the bottom of the hull..the hatch will chip extremely easy so i have included a new hatch as well as the subhatch..the boat is still water tight though....the setup is the heavily upgraded castle 1520 which is overkill of course and the turnigy 180 amp esc..the boat has an upgraded to 3/16 flex cable/water inlet/and a used octura x645 prop...the boat is fairly stable on calm water over 60 and it turns really well also on the 6s2p lipo setup...i crammed 2 6s turnigy nanotech 5000's under the hatch...and its quite the rocket now..i was not able to use the battery tray though with my big batteries...really you could run this setup on 5s and it would be in the low 50's here is whats included

    impulse boat with spare hatch and subhatch
    castle 1520 motor and cooling jacket and a spare motor mount
    turnigy 180 amp esc with 8mm bullets
    3/16 flex cable and upgraded collet
    used octura x645 prop,prop nut drive dog

    note i am hanging on to the rx and tx that came with this boat
    i will ship in original proboat box

    price is $255.00 shipped to continental us only via usps parcel post
    Last edited by RIPFENCE; 09-26-2011, 08:04 PM. Reason: price change
    "FE" STANDS FOR FRUSTRATING EXPLOSIONS
  • RIPFENCE
    Fast Electric Addict!
    • Sep 2009
    • 1332

    #2
    more picsIMPULSE SALE 009.jpgIMPULSE SALE 008.jpgIMPULSE SALE 006.jpg
    "FE" STANDS FOR FRUSTRATING EXPLOSIONS

    Comment

    • JackBlack26
      Senior Member
      • May 2007
      • 903

      #3
      Sell just the hull/hardware with extra hatch and sub hatch? If so, how much??

      Comment

      • RIPFENCE
        Fast Electric Addict!
        • Sep 2009
        • 1332

        #4
        i would like to give it a little time before i would part it....thanks i will give you dibbs for it if and when i part it
        "FE" STANDS FOR FRUSTRATING EXPLOSIONS

        Comment

        • JackBlack26
          Senior Member
          • May 2007
          • 903

          #5
          Completely understand. Thanks!

          Comment

          • Shelbie67
            Senior Member
            • Aug 2011
            • 135

            #6
            I'd like to be second in line if jackblack26 doesn't take it

            Comment

            • RIPFENCE
              Fast Electric Addict!
              • Sep 2009
              • 1332

              #7
              i will go 255.00 on this shipped i need more cash for another build of course
              "FE" STANDS FOR FRUSTRATING EXPLOSIONS

              Comment

              • roadrashracing
                Fast Electric Addict!
                • Aug 2010
                • 1462

                #8
                might be interested in esc/motor

                Comment

                • lenny
                  Fast Electric Addict!
                  • Sep 2010
                  • 4296

                  #9
                  Sold , pending more info please.
                  ? ONLY IF THEY WORK

                  My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

                  Comment

                  • lenny
                    Fast Electric Addict!
                    • Sep 2010
                    • 4296

                    #10
                    Need your paypal info please.
                    ? ONLY IF THEY WORK

                    My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

                    Comment

                    • RIPFENCE
                      Fast Electric Addict!
                      • Sep 2009
                      • 1332

                      #11
                      riipfence@yahoo.com notice the 2 ii's in my address its easy to screw it up

                      sold to lenny pending payment pm replied to
                      "FE" STANDS FOR FRUSTRATING EXPLOSIONS

                      Comment

                      • lenny
                        Fast Electric Addict!
                        • Sep 2010
                        • 4296

                        #12
                        Paypal sent.
                        ? ONLY IF THEY WORK

                        My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

                        Comment

                        • Skullcracken
                          Senior Member
                          • May 2010
                          • 617

                          #13
                          Originally posted by RIPFENCE
                          [ATTACH=CONFIG]61133[/ATTACH][ATTACH=CONFIG]61132[/ATTACH][ATTACH=CONFIG]61131[/ATTACH][ATTACH=CONFIG]61130[/ATTACH][ATTACH=CONFIG]61129[/ATTACH]hi all,

                          have a proboat impulse 31 up for sale..spent a little time speed chasing and it crashed several times as shown by the hatch and the cracks in the paint on the bottom of the hull..the hatch will chip extremely easy so i have included a new hatch as well as the subhatch..the boat is still water tight though....the setup is the heavily upgraded castle 1520 which is overkill of course and the turnigy 180 amp esc..the boat has an upgraded to 3/16 flex cable/water inlet/and a used octura x645 prop...the boat is fairly stable on calm water over 60 and it turns really well also on the 6s2p lipo setup...i crammed 2 6s turnigy nanotech 5000's under the hatch...and its quite the rocket now..i was not able to use the battery tray though with my big batteries...really you could run this setup on 5s and it would be in the low 50's here is whats included

                          impulse boat with spare hatch and subhatch
                          castle 1520 motor and cooling jacket and a spare motor mount
                          turnigy 180 amp esc with 8mm bullets
                          3/16 flex cable and upgraded collet
                          used octura x645 prop,prop nut drive dog

                          note i am hanging on to the rx and tx that came with this boat
                          i will ship in original proboat box

                          price is $255.00 shipped to continental us only via usps parcel post
                          Man I can't believe I missed this one. What a deal. WOW.

                          Comment

                          Working...