I am selling my Proboat Miss Geico, that I barely just finished building. It has a total of 2 runs on it, and I got it dialed and running great! I bought the boat on here from tooslow with some minor cosmetic damage on the top and bottom of the hull. There were some chips on the bottom which I fiber glassed and filled, and while I was at it I blue printed the bottom of the boat. There were also some cracks in the hatch, which I fixed by fiber glassing the whole hatch (also making it much stronger). The entire inside of the boat has been redone, with all of the wood stringers taken out, and the bottom being reinforced with fiberglass mat and resin. The original set up was the Feigao 8Xl and a waterproofed Himodel 200A, however this cheap speed controller popped on me
. So there are some minor black marks on the inside on the left sponson and the factory flotation is burnt. I did manage to get rid of the smell and I added some pool noodles in the sponsons to hide most of the black marks. None of the equipment was damaged physically, just cosmetically. One of the batteries has some black on it, but still performs perfect. Here is a list of the modifications:
-Fiberglass reinforced
-Blueprinted bottom
-OSE heavy duty Feigao XL motor mount
-Custom aluminum servo mount
-Aluminum rudder offset brackets
-Aluminum bulkhead fitting
-Seaking V2 180A ESC
-Feigao 8XL motor
-XL cooling jacket
-5.5mm bullet connectors
-Proboat digital servo
-Proboat 2.4ghz tx/rx
-S/B x642
I also have some of the stock parts that were removed as well as extras:
-Grimracer 42x55
-Stock Proboat prop
-Stock motor mount
-Silicone tubing
-Hatch tape
-Misc. hardware
-Extra cowl lock
-Original packaging from the Seaking 180A
-Original boat packaging as well




I am looking to get $400 shipped as is. Or a trade for a HPI Baja 5B/T/SC, I can add cash depending on the deal.

-Fiberglass reinforced
-Blueprinted bottom
-OSE heavy duty Feigao XL motor mount
-Custom aluminum servo mount
-Aluminum rudder offset brackets
-Aluminum bulkhead fitting
-Seaking V2 180A ESC
-Feigao 8XL motor
-XL cooling jacket
-5.5mm bullet connectors
-Proboat digital servo
-Proboat 2.4ghz tx/rx
-S/B x642
I also have some of the stock parts that were removed as well as extras:
-Grimracer 42x55
-Stock Proboat prop
-Stock motor mount
-Silicone tubing
-Hatch tape
-Misc. hardware
-Extra cowl lock
-Original packaging from the Seaking 180A
-Original boat packaging as well




I am looking to get $400 shipped as is. Or a trade for a HPI Baja 5B/T/SC, I can add cash depending on the deal.

Comment