Tweet
Id take $200 shipped for it. Needs ONLY a radio. It comes with a spare flex shaft and I installed a traxxas waterproof RX box because no matter what you do, a bit of water will get under the hood and I was worried about my $100 Aitronics RX's... I DO have the fake exhaust pipes and mirrors for the cowl... I took them off because I thought they looked silly but I have them. I DONT have the wing things for the back of the boat. They just stick on with double sided tape but they were not on the boat when I got them and for $25 (what they cost at tower) I didnt want to waste the money on them. I think it gives it a very clean look without them. Everything on the boat is in perfect working condition. There is no "damage" to the boat at all but there are a few stress cracks in the clear coat... they were there when I got the boat and do not effect it one bit. They are located on either side of the sponsons about half way down right along the hull seam and at the back just above the rudder. As I said, they have NO effect on the boat but I feel its important to make not of all of them.
The boat runs amazing. Its setup just right just as it is IMO. I ran it with 2 SPC 5200mah 40C 2S lipos and it was FAST... but could be turned full lock at full throttle. The cooling system works perfect and keeps the motor and ESC within safe temps for pretty much a full run. The ONLY modification thats been made to the boat is a carbon fibre plate was added behind the turn fin. This is a weak point of the boat and adding a plate is the fix. The mod was done by the previous owner who was a really knowledgable FE boat guy... its done right and looks factory.
I cant sell for less than $200... this is going to cost a FORTUNE to package and ship safely so I really cant go any lower. I dont HAVE to sell it either so if it doesnt sell for $200 ill just keep it.
Please not... NO RX is included. But the waterproof RX box is along with a spare flex shaft in a sealed package. I can also solder on deans connectors if your prefer them over the traxxas connectors.
Comes with the wooden boat stand. Dont be afraid of the duct tape on it... the way its assembled it just falls apart so the tape holds it together. Looks ghetto but is much stronger than just the wood on its own.
Now for the pics. Click for a larger version in photobucket:
Paypal only, no trades. Im a VERY reputable seller with lots of great feedback on RCtech, traxxas forums and Ebay... all under the same username. Feel free to PM me with any questions.
The boat runs amazing. Its setup just right just as it is IMO. I ran it with 2 SPC 5200mah 40C 2S lipos and it was FAST... but could be turned full lock at full throttle. The cooling system works perfect and keeps the motor and ESC within safe temps for pretty much a full run. The ONLY modification thats been made to the boat is a carbon fibre plate was added behind the turn fin. This is a weak point of the boat and adding a plate is the fix. The mod was done by the previous owner who was a really knowledgable FE boat guy... its done right and looks factory.
I cant sell for less than $200... this is going to cost a FORTUNE to package and ship safely so I really cant go any lower. I dont HAVE to sell it either so if it doesnt sell for $200 ill just keep it.
Please not... NO RX is included. But the waterproof RX box is along with a spare flex shaft in a sealed package. I can also solder on deans connectors if your prefer them over the traxxas connectors.
Comes with the wooden boat stand. Dont be afraid of the duct tape on it... the way its assembled it just falls apart so the tape holds it together. Looks ghetto but is much stronger than just the wood on its own.
Now for the pics. Click for a larger version in photobucket:
Paypal only, no trades. Im a VERY reputable seller with lots of great feedback on RCtech, traxxas forums and Ebay... all under the same username. Feel free to PM me with any questions.
Comment