Tweet
FS 200 Amp ESC
Never used, bench tested only, Hobby King 200 Amp ESC.
I have done the cooling plate rework on it to make sure the plate is sitting flat and level on all the fets properly.
New heat transfer tape was installed between fets and cooling plate and new heat shrink tube was installed.
This ESC was waterprotected with silicone conformal coating inside and out.
5.5mm connectors on the motor and battery wires installed.
Price is $50.00 PayPal, shipped Canada and USA
Here are some specs:
Weight: 128g
Size: 90x41x23mm
Cells: 2-7S Li Po
Continuous Current: 200A
Burst : 220A
Bec: No BEC (Opto)
User Programming options:
Cell type / Voltage cutoff
Throttle (Auto / 1.1ms to 1.8ms / Hard / Soft )
Brake (No Brake / Soft / Medium / Hard)
Motor Direction (Clockwise / Counter-clockwise)
Timing Mode Setting (1 / 7 / 15 / 30)
Robert
I have done the cooling plate rework on it to make sure the plate is sitting flat and level on all the fets properly.
New heat transfer tape was installed between fets and cooling plate and new heat shrink tube was installed.
This ESC was waterprotected with silicone conformal coating inside and out.
5.5mm connectors on the motor and battery wires installed.
Price is $50.00 PayPal, shipped Canada and USA
Here are some specs:
Weight: 128g
Size: 90x41x23mm
Cells: 2-7S Li Po
Continuous Current: 200A
Burst : 220A
Bec: No BEC (Opto)
User Programming options:
Cell type / Voltage cutoff
Throttle (Auto / 1.1ms to 1.8ms / Hard / Soft )
Brake (No Brake / Soft / Medium / Hard)
Motor Direction (Clockwise / Counter-clockwise)
Timing Mode Setting (1 / 7 / 15 / 30)
Robert
Comment