Tweet
Here is a yellow Mean Machine hull with complete hardware. It was a flood hull from Aeromarine. It includes a .187 flex, 5mm to .187 octura collet, an extra rudder. The boat has a carbon fiber motor mount installed and I have 2 tail rings for it as well. A 36mm and a 40mm ring are both included. There is also a lexan sub-hatch I made that helps keep the water out. The auto balers were pulled and sealed with marine weld and epoxy. Just needs to be sanded down and painted if desired. The paint has some blisters but overall its looks sharp. There was a paint crack on the bottom that has been sealed from inside and out just in case it (see pic). All the steering linkage is included too.
Basically, bolt a 3674 or a 4074 in it with your esc, servo, rx/tx and prop. I reinforced the tunnel with fiberglass and carbon fiber. I still need funds for my twin build so unfortunately this has to go. If you have any questions please don't hesitate to ask.
Shipped to continental US with insurance and tracking.
$135 shipped via paypal
Basically, bolt a 3674 or a 4074 in it with your esc, servo, rx/tx and prop. I reinforced the tunnel with fiberglass and carbon fiber. I still need funds for my twin build so unfortunately this has to go. If you have any questions please don't hesitate to ask.
Shipped to continental US with insurance and tracking.
$135 shipped via paypal
Comment