CLEAN AQ UL-1 FS M445 50mph!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • v-spec
    Banned
    • Jun 2009
    • 940

    #1

    CLEAN AQ UL-1 FS M445 50mph!

    SOLD!Hi guys,

    Selling my fairly new UL-1 it's very clean and runs in the 47-51 mph range on 4S1P according to my gps. It's got the stock 2030kv motor and newer model ESC with the huge 35v 1500uf cap.

    I've made a few mods to it.

    S&B Octura M445 prop
    Aeromarine water fittings
    Silicone water jacket
    Castle 5.5mm bullets for the esc

    I've also gone through the whole boat and aligned everything and sealed it so it won't leak. Stays nice and dry now, something it didn't do out of the box. It can get a little wild with the m445 but is very stable with either a Grim 42x55 or 40x57x3 just not as fast. I can swap in one of those props if buyer prefers.

    I'd like to see $225.00 + shipping
    I can make this completely RTR with Tactic radio receiver and a pair of 30c 2s packs for $75 more including shipping!
    I'm open to trades for other boating items.

    Got a couple projects lined up which is the only reason I'm selling, not to mention the fact that I've got another yellow UL-1

    securedownload (11).jpgsecuredownload (5).jpgsecuredownload (8).jpgsecuredownload (7).jpgsecuredownload (3).jpg
    Last edited by v-spec; 07-20-2011, 07:32 PM.
  • Hotrods
    Senior Member
    • Sep 2010
    • 281

    #2
    I have got a few things to trade if interested...you have a PM

    Comment

    • rcbidder
      Fast Electric Addict!
      • Apr 2011
      • 1228

      #3
      Sent PM.

      Comment

      • Peregrine
        Flounder
        • Jun 2011
        • 39

        #4
        Sent PM also
        The beauty of not knowing anything about FE boats is. . . You don't know when it is wrong, you just know it is fun!

        Comment

        • 12darline
          Junior Member
          • Jul 2011
          • 4

          #5
          I am willing to go $210 if you cover shipping. I am in Florida.

          Thanks...

          David

          Comment

          • v-spec
            Banned
            • Jun 2009
            • 940

            #6
            Just waiting on a few people to get back to me guys. It's a nice boat I'm glad people are interested.

            Comment

            • lenny
              Fast Electric Addict!
              • Sep 2010
              • 4294

              #7
              Pm sent.
              ? ONLY IF THEY WORK

              My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

              Comment

              • v-spec
                Banned
                • Jun 2009
                • 940

                #8
                Complete package sold payment received, Thank you very much to all who were interested.

                Comment

                • Smoothops
                  It is never fast enough..
                  • Apr 2011
                  • 128

                  #9
                  Well V-spec I see you made out on my boat that I traded you for. Pretty funny to see my motor in there that you was supposed to put into the SV-27 you traded me. Lets get everyone on the same page. I had the UL-1 and he had a SV 27 and i sent him the boat which he was going to take my motor, esc, servo and receiver then put it in his boat (SV) Well 6 weeks later of hounding him where my boat was it came without my motor, cooling jacket, servo, and it looked like an old esc. It was the same as mine but looked old. I then tried a bench test as soon as i hooked up my batteries my esc started to catch fire (smoked up) my garage was so smokey i had thought a lipo was going to blow. So after getting the smoke cleared i was not happy how this was going already. I emailed him and told him what problems I had ran into. He replied that my servo was bad, and then my motor was also so he just put in a replacement, mind you I only ran this boat 2 times and still had a payment from Tower Hobbies. So if parts were bad why not contact me because they were under warranty. So the reason i believe he did not email me was he wanted to use my parts to resell this boat. I was going to just let this go but when I seen he sold this with my motor I was supposed to have and probably my esc the fire returned to me. To end this story I took my MG esc wired it up and everything worked great. I am sure you will reply back with that was your motor, esc, and servo that you installed in my boat but whatever enjoy Karma will be around to see you.

                  Comment

                  • Hotrods
                    Senior Member
                    • Sep 2010
                    • 281

                    #10
                    Originally posted by Smoothops
                    Well V-spec I see you made out on my boat that I traded you for. Pretty funny to see my motor in there that you was supposed to put into the SV-27 you traded me. Lets get everyone on the same page. I had the UL-1 and he had a SV 27 and i sent him the boat which he was going to take my motor, esc, servo and receiver then put it in his boat (SV) Well 6 weeks later of hounding him where my boat was it came without my motor, cooling jacket, servo, and it looked like an old esc. It was the same as mine but looked old. I then tried a bench test as soon as i hooked up my batteries my esc started to catch fire (smoked up) my garage was so smokey i had thought a lipo was going to blow. So after getting the smoke cleared i was not happy how this was going already. I emailed him and told him what problems I had ran into. He replied that my servo was bad, and then my motor was also so he just put in a replacement, mind you I only ran this boat 2 times and still had a payment from Tower Hobbies. So if parts were bad why not contact me because they were under warranty. So the reason i believe he did not email me was he wanted to use my parts to resell this boat. I was going to just let this go but when I seen he sold this with my motor I was supposed to have and probably my esc the fire returned to me. To end this story I took my MG esc wired it up and everything worked great. I am sure you will reply back with that was your motor, esc, and servo that you installed in my boat but whatever enjoy Karma will be around to see you.
                    Wow I almost traded for it. Maybe someone is looking out for me. Hmmm......

                    Comment

                    • v-spec
                      Banned
                      • Jun 2009
                      • 940

                      #11
                      I don't have much to say, I've been on this forum for years with no problems. I've tried so many times to help this guy but he refused it. He burned his esc up because he wired it wrong. I've got nothing else to say. I've sold TONS of items here and most everyone seemed to have been pretty happy and I've met lots of very nice and helpful people here.

                      I'm sure you don't even realize what you did wrong and I offered to help you out but you refuse. Post a pic of that ESC and how you wired it to batteries and everyone will see what the problem was.

                      Brent.

                      Comment

                      • Smoothops
                        It is never fast enough..
                        • Apr 2011
                        • 128

                        #12
                        As i said when i wired my MG esc up and plugged my lipos in it worked same wiring setup as with the junk one you gave me. I like how you said nothing about my ul-1 motor and water jacket you got me for good day Brent.

                        Comment

                        Working...