Tweet
First Up is the truck itself
-Team Losi Lst
-1 brand new differential and housing in the front
-New front center drive shaft
-Complete set of front and rear RPM suspension arms
-Brand new Steering assembly and servo savers
-2/3 skid plates are the losi hard anodized unit, the other is included in the sale but needs to be put on
-Losi Super Bolt tires, low use
-23mm dynamite wheel hexes
-trans is forward only, with a locked first gear
-quick and dirty electric motor mount
Bought this truck to make a brushless lst but never got the funding to it.
~~~~~~~~~~~~~~~~~~
2 working transmissions, one has a mounting tab broken off but gears are fine
** both transmissions have brakes and aluminum brake arms**
1 transmission housing
3 Ti-ni 1st gear gears of various sizes
3 Ti-ni 2nd gear gears of various sizes
2 thread on clutch bells with ti-ni gears
2 standard 2 speed clutch bells (unsure of tooth count)
2 transmission input shafts
3 plastic 2 speed gears of various sizes
2 2speed hubs
~~~~~~~~~~~~~~~~~~~~~
2nd set of front and rear ends
What you see is what you get
-No diffs
-Standard a-arms etc
-front has aluminum bulkheads!
~~~~~~~~~~~~~~~~~~~~~~
More suspension bits
6 shock towers
2 custom steel wing mounts
3 chassis braces
a stock bulkhead
Not shown is another set of aluminum bulkheads
~~~~~~~~~~~~~~~~~~~~~
7 spare shocks
9 springs
1 shock has a broken end, but is still in tact
free 50 bucks worth of shock oil!:ha:
**not shown is another pair of aluminum shock caps, and miscelaneous shock parts
~~~~~~~~~~~~~~~~~~~~~
Then there is a box full of little parts like clutch plates springs etc, some Ti-ni gears
Im probably forgetting something
240 bucks takes the whole shebang, another 50 for the Hitec titanium geared servo!
Will trade for anything decent, very negotiable.
Feel free to check my feedback on Rc Tech, Rc Universe, rc-monster and others under the same username :)
-Ben
-Team Losi Lst
-1 brand new differential and housing in the front
-New front center drive shaft
-Complete set of front and rear RPM suspension arms
-Brand new Steering assembly and servo savers
-2/3 skid plates are the losi hard anodized unit, the other is included in the sale but needs to be put on
-Losi Super Bolt tires, low use
-23mm dynamite wheel hexes
-trans is forward only, with a locked first gear
-quick and dirty electric motor mount
Bought this truck to make a brushless lst but never got the funding to it.
~~~~~~~~~~~~~~~~~~
2 working transmissions, one has a mounting tab broken off but gears are fine
** both transmissions have brakes and aluminum brake arms**
1 transmission housing
3 Ti-ni 1st gear gears of various sizes
3 Ti-ni 2nd gear gears of various sizes
2 thread on clutch bells with ti-ni gears
2 standard 2 speed clutch bells (unsure of tooth count)
2 transmission input shafts
3 plastic 2 speed gears of various sizes
2 2speed hubs
~~~~~~~~~~~~~~~~~~~~~
2nd set of front and rear ends
What you see is what you get
-No diffs
-Standard a-arms etc
-front has aluminum bulkheads!
~~~~~~~~~~~~~~~~~~~~~~
More suspension bits
6 shock towers
2 custom steel wing mounts
3 chassis braces
a stock bulkhead
Not shown is another set of aluminum bulkheads
~~~~~~~~~~~~~~~~~~~~~
7 spare shocks
9 springs
1 shock has a broken end, but is still in tact
free 50 bucks worth of shock oil!:ha:
**not shown is another pair of aluminum shock caps, and miscelaneous shock parts
~~~~~~~~~~~~~~~~~~~~~
Then there is a box full of little parts like clutch plates springs etc, some Ti-ni gears
Im probably forgetting something
240 bucks takes the whole shebang, another 50 for the Hitec titanium geared servo!
Will trade for anything decent, very negotiable.
Feel free to check my feedback on Rc Tech, Rc Universe, rc-monster and others under the same username :)
-Ben
Comment