FS: OPC tunnel hull boats

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rc_speed
    Member
    • Apr 2010
    • 35

    #1

    FS: OPC tunnel hull boats

    I have 2 OPC tunnel hulls for sale. This sale is for both boats. Here is a description of each of them:

    1) this is a Dumas HotShot kit that I have built. It is unfinished. I was planning on using it for electrics. It includes a partial canopy which I started and also a plastic Dumas canopy. I have the canopy setup to be held on with some "thumb" screws.The original blueprint is included, also.

    2) This boat started as a Dumas Hotshot, also. I bought it from somebody that had it setup for nitro. I have converted it to electric and sealed up all the old epoxy that the nitro had ruined. I have pleaced carbon fiber in the tunnel section to strengthen the boat and seal it. It is not 100% smooth, but the boat should still run. I have only had this boat on the water twice and it is not tuned. You will need to get the boat setup. This boat includes a K&B lower unit with a conversion to electric. It has a Aquacraft UL-1 motor, water jacket, and an Aquacraft 60 amp esc. It also has a Traxxas "waterproof" steering servo. The canopy is held on with a couple of O-rings in the back. These are getting brittle and should be replaced (O-rings are cheap).

    I am also including the K&B 3.5 nitro motor which I got in a "deal". I have never run it, so don't know if it works or not.

    I am selling all this for $375 shipped to continental US. I will only accept paypal payments.
    All items sold As-Is. I have described things to the best of my knowledge. Please ask any questions that you have.
    Attached Files
  • steveo
    Fast Electric Addict!
    • Apr 2007
    • 1454

    #2
    how much for #2 only

    Comment

    • rc_speed
      Member
      • Apr 2010
      • 35

      #3
      I don't know. I didn't think of selling them seperately. Pm me an offer and I will consider it.

      Comment

      • rc_speed
        Member
        • Apr 2010
        • 35

        #4
        somebody's got to be interested in this stuff. pm me an offer.

        Comment

        • Gilbequick
          Senior Member
          • Jun 2007
          • 140

          #5
          What's all that stuff around the edges of the inside of the back of the hull?

          Comment

          • rc_speed
            Member
            • Apr 2010
            • 35

            #6
            silicone that I used for sealing the hatch on. I also used a layer of tape to hold the hatch on, also.

            Comment

            • steveo
              Fast Electric Addict!
              • Apr 2007
              • 1454

              #7
              interested in any trades

              Comment

              • rc_speed
                Member
                • Apr 2010
                • 35

                #8
                I'm looking for a 1/10 scale hydro that is on the Namba hull roster. I would like it to fit in the vintage class. I am trying to sell this tunnel in order to get one of these boats. But if somebody is interested in trading, I would consider it.

                Comment

                Working...