Tweet
Hello Guys,
today not presenting a HPR boat but offering one for a good friend of mine.
HPR 135 Motley Crue
A good friend of mine is selling his HPR 135 because he now changed to a Mystic 185cm which is slightly bigger. His HPR is a real dream boat, superior building quality and just high end components. The boat comes completely RTR, just without props and receiver.
Features:
Hull: HPR 135, completely reinforced and very strong
Hardware: complete HPR Hardware-Kit with arneson drives, rudder and hydraulics
engines: 2x LMT 2280/7's with Air-cooling, long water jacket and rear support
ESC's: 2x YGE 160HV with added Cap7's (5 additional caps)
lipos: 2x 10S Turnigy 5000mAh
lipo mount: CF lipo rail system, selfmade and perfect fit for the boat
design: Mötley Crue
servo: Graupner DS 8511
others: hatch lock with countersunk screws, Notaus-System
With this setup and props between Octura X447 and cut down X457 the boat is capable of speeds around 100mph.
Price offer: 3500USD + shipping
At first this may sound a lot but I'd say its cheap for what you get - just calculate a bit. Alone the servo is around 200USD (!), the ESC's with Caps 1200USD, the engines with couplers 1500USD,.....
And here some pictures of what you get (showing future 40.160's, you'll get YGE 160 HV Navys):
More pictures in higher resolution available HERE:
today not presenting a HPR boat but offering one for a good friend of mine.
HPR 135 Motley Crue
A good friend of mine is selling his HPR 135 because he now changed to a Mystic 185cm which is slightly bigger. His HPR is a real dream boat, superior building quality and just high end components. The boat comes completely RTR, just without props and receiver.
Features:
Hull: HPR 135, completely reinforced and very strong
Hardware: complete HPR Hardware-Kit with arneson drives, rudder and hydraulics
engines: 2x LMT 2280/7's with Air-cooling, long water jacket and rear support
ESC's: 2x YGE 160HV with added Cap7's (5 additional caps)
lipos: 2x 10S Turnigy 5000mAh
lipo mount: CF lipo rail system, selfmade and perfect fit for the boat
design: Mötley Crue
servo: Graupner DS 8511
others: hatch lock with countersunk screws, Notaus-System
With this setup and props between Octura X447 and cut down X457 the boat is capable of speeds around 100mph.
Price offer: 3500USD + shipping
At first this may sound a lot but I'd say its cheap for what you get - just calculate a bit. Alone the servo is around 200USD (!), the ESC's with Caps 1200USD, the engines with couplers 1500USD,.....
And here some pictures of what you get (showing future 40.160's, you'll get YGE 160 HV Navys):
More pictures in higher resolution available HERE:
? ONLY IF THEY WORK 
Comment